ISL5586 Datasheet, PDF (3/20 Pages) Intersil Corporation – Low Power Ringing SLIC for Home Gateways

ISL5586
Absolute Maximum Ratings T_A = 25^oC
Maximum Supply Voltages
V_CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +7V
V_CC - V_BAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110V
ESD (Human Body Model) . . . . . . . . . . . . . . . . . . . . . . . . . . 500V
Maximum Tip/Ring Negative Voltage Pulse (Note 7) . . . . . .V_BH-15V
Maximum Tip/Ring Positive Voltage Pulse (Note 7). . . . . . . . . . + 8V
Thermal Information
Thermal Resistance (Typical, Note 1)
θ_JA (^oC/W)
PLCC Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
53
Maximum Junction Temperature Plastic . . . . . . . . . . . . . . . . .150^oC
Maximum Storage Temperature Range . . . . . . . . . . -65^oC to 150^oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300^oC
(PLCC - Lead Tips Only)
Operating Conditions
Temperature Range
Industrial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40^oC to 85^oC
Positive Power Supply (V_CC). . . . . . . . . . . . . . . . . . . . . . . . . . . .+5V
Negative Power Supply (V_BH, V_BL). . . . . . . . . . . . . . -100V to -24V
Die Characteristics
Substrate Potential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -V_BH
Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bipolar-DI
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. θ_JA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
Electrical Specifications
Unless Otherwise Specified, T_A = -40^oC to 85^oC, V_BL = -24V, V_BH = -100V, V_CC = +5V,
AGND = BGND = 0V, loop current limit = 25mA. All AC Parameters are specified at 600Ω,
2-wire terminating impedance over the frequency band of 300Hz to 3.4kHz. Protection
resistors = 0Ω. These parameters apply generically to each product offering.
PARAMETER
TEST CONDITIONS
RINGING PARAMETERS
V_RSP Input Impedance (Note 2)
V_RSM input impedance (Note 2)
Differential Ringing Gain (Note 3)
Ringing voltage Total Distortion
4-Wire to 2-Wire Ringing Off Isolation
2-Wire to 4-Wire Transmit Isolation
V_RS to 2-Wire, R_LOAD = 5 REN
R_L = 1.3 kΩ, V_T-R = |V_BH| -5
Forward Active Mode, Referenced to V_RS Input.
Ringing Mode Referenced to the Differential
Ringing Amplitude.
Centering Voltage Accuracy
AC TRANSMISSION PARAMETERS
Tip, Referenced to V_BH/2 + 0.5V
Ring, Referenced to V_BH/2 + 0.5V
Receive Input Impedance, V_RXP (Note 2)
Receive input Impedance, V_RXM (Note 2)
Transmit Output Impedance (Note 2)
DC
Transmit Output Drive Capability (Note 2)
Current
Capacitance to Ground
4-Wire Port Overload Level
THD = 1%
2-Wire Port Overload Level
THD = 1%
2-Wire Return Loss (Note 2)
200Hz ≤ f ≤ 1kHz
1kHz ≤ f ≤ 3.4kHz
Longitudinal Current Capability per Wire (Note 2)
False Detect
False Detect in Low Power Standby
2-Wire Longitudinal Balance (ON-Hook and OFF-Hook) 200Hz, 500Hz, 1000Hz
(Notes 4, 5)
3000Hz
4-Wire Longitudinal Balance (ON-Hook and OFF-Hook) 200Hz, 500Hz, 1000Hz
(Notes 4, 5)
3000Hz
4-Wire to 2-Wire Insertion Loss
0dBmo at 1kHz
2-Wire to 4-Wire Insertion Loss
0dBmo at 1kHz
4-Wire to 4-Wire Insertion Loss
0dBmo at 1kHz
Frequency Response, On Hook, 2-Wire to 4-Wire, 4-Wire Referenced to 0dBmo at 1004Hz,
to 2-Wire, 4-Wire to 4-Wire
400Hz ≤ f ≤ 2800Hz
Frequency Response, Off Hook
2-Wire to 4-Wire, 4-Wire to 2-Wire, 4-Wire to 4-Wire
Referenced to 0dBmo at 1004Hz, f = 400Hz,
2800Hz
MIN TYP
35
-
10
-
-
99.5
-
0.8
-
100
-
100
-3.0 0.2
-3.0 0.2
379 541
100 142
-
0.01
0.30 1.0
-
1.0
3.1 3.5
3.1 3.5
-
35
-
23
20
-
10
-
58
61
53
61
58
64
53
62
2.72 2.92
-0.2
0
2.72 2.92
-0.15 0.03
-0.15 0.03
MAX UNITS
-
MΩ
-
MΩ
-
V/V
5
%
-
dB
-
dB
3.0
V
3.0
V
-
kΩ
-
kΩ
-
Ω
-
mA
100
pF
-
V_PEAK
-
V_PEAK
-
dB
-
dB
- mA_RMS
- mA_RMS
-
dB
-
dB
-
dB
-
dB
3.12 dB
0.2
dB
3.12 dB
0.15 dB
.15
dB
4-3