ISL54100A Datasheet, PDF (3/21 Pages) Intersil Corporation – TMDS Regenerators with Multiplexers

ISL54100A, ISL54101A, ISL54102A
Absolute Maximum Ratings
Voltage on V_D (referenced to GND). . . . . . . . . . . . . . . . . . . . . . 4.0V
Voltage on any Input Pin (referenced to GND) . . . -0.3V to V_D+0.3V
Voltage on any “5V Tolerant” Input Pin
(referenced to GND). . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +6.0V
Current into any Output Pin . . . . . . . . . . . . . . . . . . . . . . . . . . ±20mA
ESD Classification
Human Body Model . . . >4000V, higher voltage testing in progress
Machine Model . . . . . . . .>200V, higher voltage testing in progress
Thermal Information
Thermal Resistance (Typical, Note 1)
θ_JA (°C/W)
MQFP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Maximum Biased Junction Temperature . . . . . . . . . . . . . . . . +125°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V_D = 3.3V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTE:
1. θ_JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
Electrical Specifications Specifications apply for V_D = 3.3V, pixel rate = 165MHz, T_A = +25°C, RES_TERM = 1kΩ, RES_BIAS = 3.16kΩ,
TMDS output load = 50Ω, TMDS output termination voltage V_TERM = 3.0V unless otherwise noted.
SYMBOL
PARAMETER
COMMENT
MIN
(Note 2)
TYP
MAX
(Note 2)
UNIT
FULL CHANNEL CHARACTERISTICS
f_{DATA_MAX} Maximum Rx Clock Frequency/Pixel Rate
f_{DATA_MIN} Minimum Rx Clock Frequency/Pixel Rate
TMDS RECEIVER CHARACTERISTICS
(Note 3)
165
225
MHz
25
MHz
V_SENS Minimum Differential Input Sensitivity
R₅₀
50Ω Termination Resistance
R₁₀₀
100Ω Termination Resistance
CLK_DUTY Rx Clock Duty Cycle
TMDS TRANSMITTER CHARACTERISTICS
50
150
mV_P-P
45
50
55
Ω
90
97
110
Ω
20
80
%
j_{TX_CLOCK} Total Jitter on Clock Outputs
j_{TX_DATA} Total Jitter on Data Outputs
SKEW_INTRA Intra-Pair (+ to -) Differential Skew
SKEW_INTER Inter-Pair (channel-to-channel) Skew
Independent of incoming jitter
Independent of incoming jitter
Added with respect to incoming
inter-pair skew
32
ps
52
ps
±4
ps
2
UI
t_RISE Rise Time into 50Ω Load to 3.3V
t_FALL
Fall Time into 50Ω Load to 3.3V
TX V_OH Single-Ended High Level Output Voltage
TX V_OL Single-Ended Low Level Output Voltage
DIGITAL SCHMITT INPUT CHARACTERISTICS
20% to 80%
20% to 80%
80
80
V_TERM - 10
V_TERM - 600
240
ps
240
ps
V_TERM + 10
mV
V_TERM - 400 mV
V_IH
High Threshold Voltage
V_IL
High to Low Threshold Voltage
I
Input Leakage Current
2.0
V
0.8
V
±10
nA
R_PU
Internal Pull-Up Resistance
R_PD
Internal Pull-Down Resistance
SDA and SCL pins
AUTO_CH_SEL, CH_SEL_x,
RESET, ADDRx, PD pins
65
kΩ
60
kΩ
C_IN
Input Capacitance
5
pF
3
FN6725.0
June 17, 2008