ISL12026_10 Datasheet, PDF (3/24 Pages) Intersil Corporation – Real Time Clock/Calendar with I2C Bus™ and EEPROM

ISL12026, ISL12026A
Absolute Maximum Ratings
Voltage on V_DD, V_BAT, SCL, SDA, and IRQ/F_OUT Pins
(respect to ground) . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 6.0V
Voltage on X1 and X2 Pins
(respect to ground) . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 2.5V
Latchup (Note 4) . . . . . . . . . . . . . . . . . . . Class II, Level B @ +85°C
ESD Rating
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±2kV
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175V
Thermal Information
Thermal Resistance (Typical)
θ_JA (°C/W) θ_JC (°C/W)
8 Ld SOIC Package (Notes 5, 6) . . . . . 115
50
8 Ld TSSOP Package (Notes 5, 6) . . . 140
48
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
4. Jedec Class II pulse conditions and failure criterion used. Level B exceptions are: Using a max positive pulse of 8.35V on all pins except X1 and
X2, Using a max positive pulse of 2.75V on X1 and X2, and using a max negative pulse of -1V for all pins.
5. θ_JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
6. For θ_JC, the “case temp” location is taken at the package top center.
DC Electrical Specifications Unless otherwise noted, V_DD = +2.7V to +5.5V, T_A = -40°C to +85°C, Typical values are @ T_A = +25°C
and V_DD = 3.3V.
SYMBOL
PARAMETER
CONDITIONS
MIN
(Note 16) TYP
MAX
(Note 16)
UNIT
NOTES
V_DD
V_BAT
Main Power Supply
Backup Power Supply
2.7
5.5
V
1.8
5.5
V
Electrical Specifications
SYMBOL
PARAMETER
I_DD1 Supply Current with I²C Active
I_DD2
I_DD3
I_BAT
Supply Current for Non-Volatile
Programming
Supply Current for Main
Timekeeping (Low Power Mode)
Battery Supply Current
I_BATLKG Battery Input Leakage
V_TRIP V_BAT Mode Threshold
V_TRIPHYS V_TRIP Hysteresis
V_BATHYS V_BAT Hysteresis
V_{DD SR-} V_DD Negative Slew Rate
IRQ/F_OUT
V_OL Output Low Voltage
I_LO
Output Leakage Current
CONDITIONS
MIN
(Note 16)
V_DD = 2.7V
V_DD = 5.5V
V_DD = 2.7V
V_DD = 5.5V
V_DD = V_SDA = V_SCL = 2.7V
V_DD = V_SDA = V_SCL = 5.5V
V_BAT = 1.8V,
V_DD = V_SDA = V_SCL = V_RESET = 0
V_BAT = 3.0V,
V_DD = V_SDA = V_SCL = V_RESET = 0
V_DD = 5.5V, V_BAT = 1.8V
1.8
V_DD = 5V
I_OL = 3mA
V_DD = 1.8V
I_OL = 1mA
V_DD = 5.5V
V_OUT = 5.5V
TYP
800
850
2.2
30
50
100
MAX
(Note 16)
500
800
2.5
3.5
10
20
1000
1200
100
2.6
10
0.4
0.4
400
UNIT
µA
µA
mA
mA
µA
µA
nA
NOTES
7, 8, 9
7, 8, 9
9
7, 10, 11
nA
nA
V
mV
mV
V/ms
11
11, 14
11, 14
12
V
V
nA
3
FN8231.9
November 30, 2010