HCTS540MS Datasheet, PDF (3/10 Pages) Intersil Corporation – Radiation Hardened Inverting Octal Buffer/Line Driver, Three-State

Specifications HCTS540MS
Absolute Maximum Ratings
Reliability Information
Supply Voltage (VCC). . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +7.0V
Input Voltage Range, All Inputs . . . . . . . . . . . . .-0.5V to VCC +0.5V
DC Input Current, Any One Input . . . . . . . . . . . . . . . . . . . . . . . .±10mA
DC Drain Current, Any One Output. . . . . . . . . . . . . . . . . . . . . . .±25mA
(All Voltage Reference to the VSS Terminal)
Storage Temperature Range (TSTG) . . . . . . . . . . . -65^oC to +150^oC
Lead Temperature (Soldering 10sec) . . . . . . . . . . . . . . . . . . +265^oC
Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . +175^oC
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
Thermal Resistance
θ_JA
θ_JC
SBDIP Package. . . . . . . . . . . . . . . . . . . . 72^oC/W 24^oC/W
Ceramic Flatpack Package . . . . . . . . . . . 107^oC/W 28^oC/W
Maximum Package Power Dissipation at +125^oC Ambient
SBDIP Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.69W
Ceramic Flatpack Package . . . . . . . . . . . . . . . . . . . . . . . . . 0.47W
If device power exceeds package dissipation capability, provide heat
sinking or derate linearly at the following rate:
SBDIP Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.9mW/^oC
Ceramic Flatpack Package . . . . . . . . . . . . . . . . . . . . . . 9.3mW/^oC
CAUTION: As with all semiconductors, stress listed under “Absolute Maximum Ratings” may be applied to devices (one at a time) without resulting in permanent
damage. This is a stress rating only. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. The conditions listed
under “Electrical Performance Characteristics” are the only conditions recommended for satisfactory device operation.
Operating Conditions
Supply Voltage (VCC). . . . . . . . . . . . . . . . . . . . . . . . +4.5V to +5.5V
Operating Temperature Range (T_A) . . . . . . . . . . . . -55^oC to +125^oC
Input Rise and Fall Times at 4.5V VCC (TR, TF) . . . . . . 500ns Max.
Input Low Voltage (VIL). . . . . . . . . . . . . . . . . . . . . . . . . 0.0V to 0.8V
Input High Voltage (VIH) . . . . . . . . . . . . . . . . . . . . . . .VCC/2 to VCC
PARAMETER
Quiescent Current
Output Current
(Sink)
Output Current
(Source)
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS
SYMBOL
(NOTE 1)
CONDITIONS
ICC
VCC = 5.5V,
VIN = VCC or GND
IOL
VCC = 4.5V, VIH = 4.5V,
VOUT = 0.4V, VIL = 0V
IOH
VCC = 4.5V, VIH = 4.5V,
VOUT = VCC - 0.4V,
VIL = 0V
GROUP
A SUB-
GROUPS
1
2, 3
1
2, 3
1
2, 3
TEMPERATURE
+25^oC
+125^oC, -55^oC
+25^oC
+125^oC, -55^oC
+25^oC
+125^oC, -55^oC
LIMITS
MIN MAX UNITS
-
40
µA
-
750
µA
7.2
-
mA
6.0
-
mA
-7.2
-
mA
-6.0
-
mA
Output Voltage Low
VOL
VCC = 4.5V, VIH = 2.25V,
1, 2, 3
+25^oC, +125^oC, -55^oC
-
0.1
V
IOL = 50µA, VIL = 0.8V
VCC = 5.5V, VIH = 2.75V,
1, 2, 3
+25^oC, +125^oC, -55^oC
-
0.1
V
IOL = 50µA, VIL = 0.8V
Output Voltage High
VOH
VCC = 4.5V, VIH = 2.25V,
1, 2, 3
+25^oC, +125^oC, -55^oC VCC
-
V
IOH = -50µA, VIL = 0.8V
-0.1
VCC = 5.5V, VIH = 2.75V,
1, 2, 3
+25^oC, +125^oC, -55^oC VCC
-
V
IOH = -50µA, VIL = 0.8V
-0.1
Input Leakage
Current
IIN
VCC = 5.5V, VIN = VCC or
1
GND
2, 3
+25^oC
+125^oC, -55^oC
-
±0.5
µA
-
±5.0
µA
Three-State Output
IOZ
VCC = 5.5V, Applied Volt-
1
Leakage Current
age = 0V or VCC
2, 3
+25^oC
+125^oC, -55^oC
-
±1
µA
-
±50
µA
Noise Immunity
Functional Test
FN
VCC = 4.5V, VIH = 2.25V, 7, 8A, 8B +25^oC, +125^oC, -55^oC
-
-
-
VIL = 0.8V (Note 2)
NOTES:
1. All voltages referenced to device GND.
2. For functional tests, VO ≥ 4.0V is recognized as a logic “1”, and VO ≤ 0.5V is recognized as a logic “0”.
Spec Number 518631
3