HCS02MS Datasheet, PDF (3/8 Pages) Intersil Corporation – Radiation Hardened Quad 2-Input NOR Gate

Specifications HCS02MS
TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS
PARAMETER
Input to Yn
SYMBOL
TPHL
(NOTES 1, 2)
CONDITIONS
VCC = 4.5V
Input to Yn
TPLH VCC = 4.5V
GROUP
A SUB-
GROUPS
9
10, 11
9
10, 11
TEMPERATURE
+25^oC
+125^oC, -55^oC
+25^oC
+125^oC, -55^oC
NOTES:
1. All voltages referenced to device GND.
2. AC measurements assume RL = 500Ω, CL = 50pF, Input TR = TF = 3ns, VIL = GND, VIH = VCC.
LIMITS
MIN MAX UNITS
2
18
ns
2
20
ns
2
20
ns
2
22
ns
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS
LIMITS
PARAMETER
Capacitance Power
Dissipation
SYMBOL
CPD
CONDITIONS
VCC = 5.0V, f = 1MHz
Input Capacitance
CIN
VCC = 5.0V, f = 1MHz
Output Transition
Time
TTHL
TTLH
VCC = 4.5V
NOTES
TEMPERATURE
MIN
MAX UNITS
1
+25^oC
-
18
pF
1
+125^oC, -55^oC
-
26
pF
1
+25^oC
-
10
pF
1
+125^oC
-
10
pF
1
+25^oC
-
15
ns
1
+125^oC
-
22
ns
NOTE:
1. The parameters listed in Table 3 are controlled via design or process parameters. Min and Max Limits are guaranteed but not directly
tested. These parameters are characterized upon initial design release and upon design changes which affect these characteristics.
TABLE 4. DC POST RADIATION ELECTRICAL PERFORMANCE CHARACTERISTICS
PARAMETERS
Quiescent Current
Output Current (Sink)
Output Current
(Source)
Output Voltage Low
Output Voltage High
Input Leakage Current
Noise Immunity
Functional Test
Input to Yn
SYMBOL
ICC
IOL
IOH
VOL
VOH
IIN
FN
TPHL
TPLH
(NOTES 1, 2)
CONDITIONS
VCC = 5.5V, VIN = VCC or GND
VCC = 4.5V, VIN = VCC or GND, VOUT = 0.4V
VCC = 4.5V, VIN = VCC or GND,
VOUT = VCC -0.4V
VCC = 4.5V or 5.5V, VIH = 0.70(VCC),
VIL = 0.30(VCC) at 200K RAD, IOL = 50µA
VCC = 4.5V or 5.5V, VIH = 0.70(VCC),
VIL = 0.30(VCC) at 200K RAD, IOH = -50µA
VCC = 5.5V, VIN = VCC or GND
VCC = 4.5V, VIH = 0.70(VCC),
VIL = 0.30(VCC) at 200K RAD, (Note 3)
VCC = 4.5V
VCC = 4.5V
TEMPERATURE
+25^oC
+25^oC
+25^oC
+25^oC
+25^oC
+25^oC
+25^oC
+25^oC
+25^oC
200K RAD LIMITS
MIN MAX
-
0.2
4.0
-
-4.0
-
-
0.1
VCC
-
-0.1
-
±5
-
-
2
20
2
22
UNITS
mA
mA
mA
V
V
µA
-
ns
ns
NOTES:
1. All voltages referenced to device GND.
2. AC measurements assume RL = 500Ω, CL = 50pF, Input TR = TF = 3ns, VIL = GND, VIH = VCC.
3. For functional tests, VO ≥ 4.0V is recognized as a logic “1”, and VO ≤ 0.5V is recognized as a logic “0”.
Spec Number 518744
3