X5163S8IZT1 Datasheet, PDF (22/22 Pages) Intersil Corporation – Selectable watchdog timer

X5163, X5165
Package Outline Drawing
M14.173
14 LEAD THIN SHRINK SMALL OUTLINE PACKAGE (TSSOP)
Rev 3, 10/09
A
13
5.00 ±0.10
14
8
SEE
DETAIL "X"
6.40
4.40 ±0.10
2
3
PIN #1
I.D. MARK
0.20 C B A
1
7
0.65
B
TOP VIEW
H
C
SEATING
PLANE
0.10 C
0.05
1.20 MAX
0.25 +0.05/-0.06 5
0.10 CBA
SIDE VIEW
0.09-0.20
END VIEW
1.00 REF
0.90 +0.15/-0.10
0.05 MIN
0.15 MAX
DETAIL "X"
GAUGE
PLANE
0.25
0°-8°
0.60 ±0.15
(1.45)
(5.65)
(0.65 TYP)
(0.35 TYP)
TYPICAL RECOMMENDED LAND PATTERN
NOTES:
1. Dimension does not include mold flash, protrusions or gate burrs.
Mold flash, protrusions or gate burrs shall not exceed 0.15 per side.
2. Dimension does not include interlead flash or protrusion. Interlead
flash or protrusion shall not exceed 0.25 per side.
3. Dimensions are measured at datum plane H.
4. Dimensioning and tolerancing per ASME Y14.5M-1994.
5. Dimension does not include dambar protrusion. Allowable protrusion
shall be 0.80mm total in excess of dimension at maximum material
condition. Minimum space between protrusion and adjacent lead is 0.07mm.
6. Dimension in ( ) are for reference only.
7. Conforms to JEDEC MO-153, variation AB-1.
Submit Document Feedback 22
FN8128.4
August 13, 2015