HA2556 Datasheet, PDF (20/20 Pages) Intersil Corporation – Wideband Four Quadrant Analog Multiplier (Voltage Output)

HA2556
DESIGN INFORMATION (Continued)
The information contained in this section has been developed through characterization by Intersil Semiconductor and is for use as
application and design information only. No guarantee is implied.
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
Device Tested at Supply Voltage = ±15V, R_F = 50Ω, R_L = 1kΩ, C_L = 20pF, Unless Otherwise Specified.
PARAMETERS
Overshoot
SYMBOL
+OS, -OS
CONDITIONS
V_Y = 200mV step, V_X = 5V
Slew Rate
+SR, -SR V_Y = 10V step, V_X = 5V
Differential Input Resistance
V_X CHARACTERISTICS
Bandwidth
Gain Flatness
AC Feedthrough
Rise & Fall Time
R_IN (V_Y)
BW (V_X)
GF (V_X)
V_ISO (1MHz)
V_ISO (5MHz)
T_R, T_F
V_Y = ±5V, V_X = 0V
-3dB, V_Y = 5V, V_X ≤ 200mV_P-P
0.1dB, V_Y = 5V, V_X ≤ 200mV_P-P
f_O = 1MHz, V_X = 200mV_P-P,V_Y = nulled (Note 2)
f_O = 5MHz, V_X = 200mV_P-P, V_Y = nulled (Note 2)
V_X = 200mV step, V_Y = 5V, 10% to 90% pts
Overshoot
+OS, -OS V_X = 200mV step, V_Y = 5V
Slew Rate
+SR, -SR V_X = 10V step, V_Y = 5V
Differential Input Resistance R_IN (V_X)
OUTPUT CHARACTERISTICS
Output Resistance
Output Current
R_OUT
I_OUT
V_X = ±5V, V_Y = 0V
V_Y = ±5V, V_X = 5V, R_L = 1kΩ to 250Ω
V_OUT = 5V, R_L = 250Ω
Output Voltage Swing
+V_OUT
R_L = 250Ω
TEMP
+25^oC
+125^oC, -55^oC
+25^oC
+125^oC, -55^oC
+25^oC
+25^oC
+25^oC
+25^oC
+25^oC
+25^oC
+125^oC, -55^oC
+25^oC
+125^oC, -55^oC
+25^oC
+125^oC, -55^oC
+25^oC
+25^oC
+25^oC
+125^oC, -55^oC
+25^oC
+125^oC, -55^oC
NOTES:
1. V_Z AC characteristics may be implied from V_Y due to the use of V_Z as feedback in the test circuit.
2. Offset voltage applied to minimize feedthrough signal.
TYP
17
17
450
450
1
52
4.0
-65
-50
8
8
17
17
450
450
1
0.7
±45
±45
±6.05
±6.05
UNITS
%
%
V/µs
V/µs
MΩ
MHz
MHz
dB
dB
ns
ns
%
%
V/µs
V/µs
MΩ
Ω
mA
mA
V
V
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate
and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
Spec Number 511063-883
8-26