ISL59832 Datasheet, PDF (2/14 Pages) Intersil Corporation – Dual Channel, Single Supply Video Reconstruction Filter with Charge Pump

ISL59832
Absolute Maximum Ratings (T_A = +25°C)
V_S to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4V
V_IN to GND. . . . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V to V_S + 0.3V
Maximum Continuous Output Current . . . . . . . . . . . . . . . . . . ±50mA
Maximum Current into Any Pin . . . . . . . . . . . . . . . . . . . . . . . ±50mA
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7) . . .3500V
Machine Model (Per EIAJ ED-4701 Method C-111) . . . . . . . .350V
Thermal Information
or Thermal Resistance (Typical, Note 1)
θ_JA (°C/W)
16 Lead TQFN Package . . . . . . . . . . . . . . . . . . . . .
46
Maximum Junction Temperature (Plastic Package) . . . . . . . +150°C
Maximum Storage Temperature Range . . . . . . . . . .-65°C to +150°C
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: T_J = T_C = T_A
NOTES:
1. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379.
2. Parameters with MIN and/or MAX limits are 100% tested at +27°C, unless otherwise specified. Temperature limits established by characterization
and are not production tested.
Electrical Specifications V_S = V_CP = 3.3V, C_F = 0.1µF, C_S = 0.22µF, C_FIL = 0.4µF, C_IN1 = C_IN2 = 0.1µF, R_L1 = R_L2 = 150Ω,
Typical T_A = +27°C.
SYMBOL
PARAMETER
CONDITIONS
MIN
MAX
(Note 2) TYP (Note 2)
UNIT
DC CHARACTERISTICS
V_S, V_CP
VEE_OUT
I_S
I_CP
I_PD
I_IN
I_B
Supply Range
Charge Pump Output
Supply Current
Charge Pump Supply Current
Power-Down Current
Input Pull-down Current
Input Bias Current
guaranteed by PSRR
No load
No load
ENABLE = 0.4V
Channel 1, V_IN = 0.5V
Channel 2, V_IN = 0.5V,
SYNC_IN = 0V
3.0
3.3
3.6
V
-1.75 -1.5 -1.25
V
14
16
mA
17
20
mA
0.3
2.5
µA
0.4
4
10
µA
-10
-3
10
µA
A_V
V_{IN_MAX}
DC Gain
Max DC Input Range
1.94
2
2.05
V/V
DC-Coupled Input, guaranteed by DC
1.4
V
gain test
V_CLAMPOUT1
Output Sync Tip Clamp Level
(Channel 1)
V_IN ≤ 0, AC-coupled input
-650 -590 -525
mV
V_CLAMPOUT2
Keyed Clamp Level
(Channel 2)
Output level when SYNC_IN = 2.0V
-60
-25
0
mV
V_CLAMPIN
V_CLAMPIN2
Input Clamp Level
Input Keyed Clamp Level
(Channel 2)
Input floating
0
30
70
mV
Input floating, input level when SYNC_IN 275
300
375
mV
≥ 2.0V
V_OS
Output Level Shift
(Channel 1)
V_IN > 0, output shifted relative to input,
-685
-620
-550
mV
DC-coupled input
Output Level Shift
(Channel 2)
V_IN > 0, output shifted relative to input,
-380
-330
-280
mV
DC-coupled input
2
FN6267.1
June 11, 2008