ISL54062_0911 Datasheet, PDF (2/16 Pages) Intersil Corporation – Negative Signal Swing, Sub-ohm, Dual SPDT

ISL54062
Pinout (Note 1)
IN1 1
NO1 2
COM1 3
NC1 4
GND 5
ISL54062
(10 LD TDFN)
TOP VIEW
CLICK
AND POP
CIRCUITRY
10 IN2
9 NO2
8 COM2
7 NC2
6 V+
NO1 8
ISL54062
(10 LD µTQFN)
TOP VIEW
IN1 IN2
7
6
COM1 9
NC1 ¹⁰
CLICK
AND POP
CIRCUITRY
1
2
GND
V+
NOTE:
1. Switches Shown for INx = Logic “0”.
5 NO2
4 COM2
3 NC2
Truth Table
IN1
IN2
NC1
NO1
NC2
NO2
0
0
ON
OFF
ON
OFF
0
1
ON
OFF
OFF
ON
1
0
OFF
ON
ON
OFF
1
1
OFF
ON
OFF
ON
NOTE: Logic “0” ≤0.5V. Logic “1” ≥1.4V with a 3V supply.
Pin Descriptions
PIN
FUNCTION
V+ IC Power Supply (+1.8V to +6.5V). Decouple V+ to
ground by placing a 0.1µF capacitor at the V+ and GND
supply lines as near as the IC as possible.
GND Ground Connection
INx Digital Control Input
COMx Analog Switch Common Pin
NOx Analog Switch Normally Open Pin
NCx Analog Switch Normally Closed Pin
Ordering Information
PART
NUMBER
PART
MARKING
TEMP. RANGE
(°C)
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL54062IRTZ
(Note 3)
4062
-40 to +85
10 Ld 3x3 TDFN
L10.3x3A
ISL54062IRTZ-T
(Notes 2, 3)
4062
-40 to +85
10 Ld 3x3 TDFN (Tape and Reel)
L10.3x3A
ISL54062IRUZ-T
8
(Notes 2, 4)
-40 to +85
10 Ld Thin µTQFN (Tape and Reel)
L10.1.8x1.4A
NOTES:
2. Please refer to TB347 for details on reel specifications.
3. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte
tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-
020.
4. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and NiPdAu
plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
2
FN6581.1
November 3, 2009