HC-5509B3999-003 Datasheet, PDF (2/10 Pages) Intersil Corporation – SLIC Subscriber Line Interface Circuit

HC-5509B3999-003
Absolute Maximum Ratings (Note 1)
Operating Conditions
Relay Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +15V
Maximum Supply Voltages
(V_B+) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +7V
(V_B+)-(V_B-) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+75V
Junction Temperature Ceramic . . . . . . . . . . . . . . . . . . . . . . .+175^oC
Junction Temperature Plastic. . . . . . . . . . . . . . . . . . . . . . . . .+150^oC
Lead Temperature (Soldering 10s) . . . . . . . . . . . . . . . . . . . .+300^oC
(For SOIC - Lead Tips Only)
Operating Temperature Range
HC-5509B3999-003 . . . . . . . . . . . . . . . . . . . . . . . . 0^oC to +75^oC
Storage Temperature Range. . . . . . . . . . . . . . . . . . -65^oC to +150^oC
Relay Drivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5V to +12V
Positive Power Supply (V_B+) . . . . . . . . . . . . . . . . . . . . . . . . +5V ±5%
Negative Power Supply (V_B-) . . . . . . . . . . . . . . . . . . . . -42V to -58V
Loop Resistance (R_L) . . . . . . . . . . . . . . . . . 200Ω to 1750Ω (Note 2)
Thermal Information
Thermal Resistance (Typical)
θ_JA (^oC/W)
SOIC Package. . . . . . . . . . . . . . . . . . . . . . . . . . .
75
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Electrical Specifications
Unless Otherwise Specified, Typical Parameters are at T_A = +25^oC, Min-Max Parameters are Over Operating
Temperature Range, V_B- = -48V, V_B+ = +5V, AG = DG = BG = 0V. All AC Parameters are specified at 600Ω
2-Wire Terminating Impedance.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNITS
AC TRANSMISSION PARAMETERS
RX Input Impedance
300Hz to 3.4kHz (Note 3)
-
100
-
kΩ
TX Output Impedance
300Hz to 3.4kHz (Note 3)
-
-
20
Ω
4-Wire Input Overload Level
300Hz to 3.4kHz R_L = 1200Ω,
600Ω Reference
+1.5
-
-
V_PEAK
2-Wire Return Loss
Matched for 600Ω (Note 3)
SRL LO
26
35
-
dB
ERL
30
40
-
dB
SRL HI
30
40
-
dB
2-Wire Longitudinal to Metallic Balance
Off Hook
Per ANSI/IEEE STD 455-1976 (Note 3) 300Hz to 58
63
-
dB
3400Hz
4-Wire Longitudinal Balance
Off Hook
300Hz to 3400Hz (Note 3)
50
55
-
dB
Low Frequency Longitudinal Balance
Longitudinal Current Capability
Insertion Loss
R.E.A. Test Circuit
I_LINE = 40mA T_A = +25^oC (Note 3)
I_LINE = 40mA T_A = +25^oC (Note 3)
0dBm at 1kHz, Referenced 600Ω
-
-
-67
dBmp
-
-
23
dBrnC
-
-
30
mA_RMS
2-Wire/4-Wire
-
±0.05 ±0.2
dB
4-Wire/2-Wire
-
±0.05 ±0.2
dB
4-Wire/4-Wire
-
-
±0.2
dB
Frequency Response
300Hz to 3400Hz (Note 3) Referenced to
Absolute Level at 1kHz, 0dBm Referenced
600Ω7
-
±0.02 ±0.05
dB
Level Linearity
Referenced to -10dBm (Note 3)
2-Wire to 4-Wire and 4-Wire to 2-Wire
+3 to -40dBm
-
-
±0.05
dB
-40 to -50dBm
-
-
±0.1
dB
-50 to -55dBm
-
-
±0.3
dB
Absolute Delay
(Note 3)
2-Wire/4-Wire
300Hz to 3400Hz
-
-
1
µs
4-Wire/2-Wire
300Hz to 3400Hz
-
-
1
µs
4-Wire/4-Wire
300Hz to 3400Hz
-
-
1.5
µs
2