FN6579 Datasheet, PDF (2/14 Pages) Intersil Corporation – Negative Signal Swing, Sub-ohm, Dual SPDT Single Supply Switch

Pinout (Note 1)
ISL54059
(10 LD TDFN)
TOP VIEW
IN1 1
NO1 2
COM1 3
NC1 4
GND 5
10 IN2
9 NO2
8 COM2
7 NC2
6 V+
NO1 8
ISL54059
(10 LD µTQFN)
TOP VIEW
IN1
IN2
7
6
5 NO2
COM1 9
4 COM2
NC1 10
1
2
GND
V+
NOTE:
1. Switches Shown for INx = Logic “0”.
3 NC2
ISL54059
Truth Table
IN1
IN2
NC1
NO1
NC2
NO2
0
0
ON
OFF
ON
OFF
0
1
ON
OFF
OFF
ON
1
0
OFF
ON
ON
OFF
1
1
OFF
ON
OFF
ON
NOTE: Logic “0” ≤0.5V. Logic “1” ≥1.4V with a 3V supply.
Pin Descriptions
PIN
FUNCTION
V+ IC Power Supply (+1.8V to +6.5V). Decouple V+ to
ground by placing a 0.1µF capacitor at the V+ and GND
supply lines as near as the IC as possible.
GND Ground Connection
INx Digital Control Input
COM Analog Switch Common Pin
NOx Analog Switch Normally Open Pin
NCx Analog Switch Normally Closed Pin
Ordering Information
PART
NUMBER
PART
MARKING
TEMP. RANGE
(°C)
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL54059IRTZ
(Note 3)
4059
-40 to +85
10 Ld 3x3 TDFN
L10.3x3A
ISL54059IRTZ-T
(Notes 2, 3)
4059
-40 to +85
10 Ld 3x3 TDFN (Tape and Reel)
L10.3x3A
ISL54059IRUZ-T
7
(Notes 2, 4)
-40 to +85
10 Ld Thin µTQFN (Tape and Reel)
L10.1.8x1.4A
NOTES:
2. Please refer to TB347 for details on reel specifications.
3. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte
tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-
020.
4. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and NiPdAu
plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
2
FN6579.2
March 11, 2011