HA5023883 Datasheet, PDF (19/19 Pages) Intersil Corporation – Dual 125MHz Video Current Feedback Amplifier

Specifications HA5023
Electrical Specifications V+ = +5V, V- = -5V, R_F = 1kΩ, A_V = +1, R_L = 400Ω, C_L ≤10pF, Unless Otherwise Specified (Contin-
PARAMETER
Overshoot
-3dB Bandwidth (Note 8)
Settling Time to 1%, 2V Output Step
Settling Time to 0.1%, 2V Output Step
(NOTE 16)
TEST
LEVEL
B
B
B
B
TEMPERATURE
+25^oC
+25^oC
+25^oC
+25^oC
HA5023I
MIN
TYP MAX
-
1.8
-
-
65
-
-
75
-
-
130
-
UNITS
%
MHz
ns
ns
VIDEO CHARACTERISTICS
Differential Gain (Notes 11, 13)
Differential Phase (Notes 11, 13)
B
+25^oC
-
0.03
-
%
B
+25^oC
-
0.03
-
Degrees
NOTES:
1. Absolute maximum ratings are limiting values, applied individually, beyond which the serviceability of the circuit may be impaired. Func-
tional operation under any of these conditions is not necessarily implied.
2. Output is protected for short circuits to ground. Brief short circuits to ground will not degrade reliability, however, continuous (100% duty
cycle) output current should not exceed 15mA for maximum reliability.
3. V_CM = ±2.5V. At -40^oC Product is tested at V_CM = ±2.25V because Short Test Duration does not allow self heating.
4. ±3.5V ≤ V_S ≤ ±6.5V
5. V_OUT switches from -2V to +2V, or from +2V to -2V. Specification is from the 25% to 75% points.
6. FPBW = _2-S---π-l--e-V--w--P----R-E---a-A---t-e-K-- ; VPEAK = 2V
7. R_L = 100Ω, V_OUT = 1V. Measured from 10% to 90% points for rise/fall times; from 50% points of input and output for propagation delay.
8. R_L = 400Ω, V_OUT = 100mV.
9. A. Production Tested; B. Guaranteed Limit or Typical based on characterization; C. Design Typical for information only.
10. V_IN = ±2.5V, V_OUT = 0V.
11. Measured with a VM700A video tester using an NTC-7 composite VITS.
12. Maximum power dissipation, including output load, must be designed to maintain junction temperature below +175^oC for die, and below
+150^oC for plastic packages. See Applications Information section for safe operating area information.
13. R_L = 150Ω .
14. V_OUT = ±2.5V. At -40^oC Product is tested at V_OUT = ±2.25V because Short Test Duration does not allow self heating.
15. ESD protection is for human body model tested per MIL-STD - 883, Method 3015.7.
16. A. Production Tested; B. Guaranteed limit or Typical based on characterization; C. Design Typical for information only.
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
19