|
HA5023883 Datasheet, PDF (1/19 Pages) Intersil Corporation – Dual 125MHz Video Current Feedback Amplifier | |||
|
TM
HA5023/883
January 1995
Dual 125MHz Video Current
Feedback Amplifier
Features
Description
⢠This Circuit is Processed in Accordance to MIL-STD-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
⢠Wide Unity Gain Bandwidth . . . . . . . . . . . . . . . 125MHz
⢠Slew Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475V/µs
⢠Differential Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.03%
⢠Differential Phase . . . . . . . . . . . . . . . . . . . . . . 0.03 Deg.
⢠Supply Current (per Amplifier) . . . . . . . . . . . . . . . 7.5mA
⢠Crosstalk Rejection at 10MHz. . . . . . . . . . . . . . . . -60dB
⢠ESD Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000V
⢠Guaranteed Specifications at ±5V Supplies
Applications
The HA5023/883 is a dual version of the popular Intersil
HA-5020/883 except that it does not have an enable function. It
features wide bandwidth and high slew rate, and is optimized
for video applications and gains between 1 and 10. It is a cur-
rent feedback amplifier and thus yields less bandwidth degra-
dation at high closed loop gains than voltage feedback
amplifiers.
The low differential gain and phase, 0.1dB gain flatness, and
ability to drive two back terminated 75⦠cables, make this
amplifier ideal for demanding video applications.
The current feedback design allows the user to take advan-
tage of the amplifierâs bandwidth dependency on the feed-
back resistor. By reducing RF , the bandwidth can be
increased to compensate for decreases at higher closed
loop gains or heavy output loads.
⢠Video Gain Block
⢠Video Distribution Amplifier/RGB Amplifier
Ordering Information
⢠Flash A/D Driver
⢠Current to Voltage Converter
⢠Radar and Imaging Systems
PART
NUMBER
HA5023MJ/883
TEMPERATURE
RANGE
-55oC to +125oC
PACKAGE
8 Lead CerDIP
⢠Medical Imaging
Pinout
HA5023/883
(CERDIP)
TOP VIEW
OUT1 1
-IN1 2
+IN1 3
V- 4
8 V+
7 OUT2
6 -IN2
5 +IN2
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002. All Rights Reserved
1
Spec Number 511108-883
FN3730.1
|
▷ |