|
ISL32172E Datasheet, PDF (18/20 Pages) Intersil Corporation – QUAD, ±16.5kV ESD Protected, 3.0V to 5.5V, Low Power, RS-422 Transmitters | |||
|
◁ |
ISL32172E, ISL32272E, ISL32372E, ISL32174E, ISL32274E, ISL32374E, ISL32179E
Small Outline Plastic Packages (SOIC)
N
INDEX
AREA
H
E
-B-
0.25(0.010) M B M
123
-A-
D
SEATING PLANE
A
L
h x 45°
-C-
α
e
A1
C
B
0.10(0.004)
0.25(0.010) M C A M B S
NOTES:
1. Symbols are defined in the âMO Series Symbol Listâ in Section 2.2 of
Publication Number 95.
2. Dimensioning and tolerancing per ANSI Y14.5M-1982.
3. Dimension âDâ does not include mold flash, protrusions or gate burrs.
Mold flash, protrusion and gate burrs shall not exceed 0.15mm (0.006
inch) per side.
4. Dimension âEâ does not include interlead flash or protrusions. Interlead
flash and protrusions shall not exceed 0.25mm (0.010 inch) per side.
5. The chamfer on the body is optional. If it is not present, a visual index
feature must be located within the crosshatched area.
6. âLâ is the length of terminal for soldering to a substrate.
7. âNâ is the number of terminal positions.
8. Terminal numbers are shown for reference only.
9. The lead width âBâ, as measured 0.36mm (0.014 inch) or greater above
the seating plane, shall not exceed a maximum value of 0.61mm
(0.024 inch).
10. Controlling dimension: MILLIMETER. Converted inch dimensions are
not necessarily exact.
M16.15 (JEDEC MS-012-AC ISSUE C)
16 LEAD NARROW BODY SMALL OUTLINE PLASTIC PACKAGE
INCHES
MILLIMETERS
SYMBOL MIN
MAX
MIN
MAX NOTES
A
0.0532 0.0688 1.35
1.75
-
A1
0.0040 0.0098 0.10
0.25
-
B
0.013 0.020
0.33
0.51
9
C
0.0075 0.0098 0.19
0.25
-
D
0.3859 0.3937 9.80 10.00
3
E
0.1497 0.1574 3.80
4.00
4
e
0.050 BSC
1.27 BSC
-
H
0.2284 0.2440 5.80
6.20
-
h
0.0099 0.0196 0.25
0.50
5
L
0.016 0.050
0.40
1.27
6
N
16
16
7
α
0°
8°
0°
8°
-
Rev. 1 6/05
18
FN6824.0
December 16, 2008
|
▷ |