X9315_09 Datasheet, PDF (14/16 Pages) Intersil Corporation – Digitally Controlled Potentiometer (XDCP™)

X9315
Package Outline Drawing
M8.15E
8 LEAD NARROW BODY SMALL OUTLINE PLASTIC PACKAGE
Rev 0, 08/09
4
4.90 ± 0.10
A
DETAIL "A"
0.22 ± 0.03
PIN NO.1
ID MARK
5
1.27
B
6.0 ± 0.20
3.90 ± 0.10
4
TOP VIEW
0.43 ± 0.076
0.25 M C A B
(0.35) x 45°
4° ± 4°
SIDE VIEW “B”
1.75 MAX
0.175 ± 0.075
SIDE VIEW “A
(1.27)
(0.60)
(1.50)
(5.40)
TYPICAL RECOMMENDED LAND PATTERN
1.45 ± 0.1
DETAIL "A"
0.25
GAUGE PLANE _C
SEATING PLANE
0.10 C
0.63 ±0.23
NOTES:
1. Dimensions are in millimeters.
Dimensions in ( ) for Reference Only.
2. Dimensioning and tolerancing conform to AMSE Y14.5m-1994.
3. Unless otherwise specified, tolerance : Decimal ± 0.05
4. Dimension does not include interlead flash or protrusions.
Interlead flash or protrusions shall not exceed 0.25mm per side.
5. The pin #1 identifier may be either a mold or mark feature.
6. Reference to JEDEC MS-012.
14
FN8179.2
December 21, 2009