ISL71090SEH50 Datasheet, PDF (12/13 Pages) Intersil Corporation – RH voltage regulators precision outputs

ISL71090SEH50
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to the web to make sure that
you have the latest revision.
DATE
REVISION
CHANGE
March 15, 2016
FN8588.3
-Updated Related Literature document titles to match titles on the actual documents.
-Corrected the Evaluation board part number in the Ordering Information table on page 2.
-Added Table 1 on page 2.
-On page 5:
Changed Electrical Specification for Flatpack note from: “Boldface limits apply over the operating
temperature range, -55°C to +125°C and radiation.” To: “Boldface limits apply after radiation at 25°C or
across the operating temperature range, -55°C to +125°C without radiation, unless otherwise specified.”
For parameter V_OA (row 4) in Electrical Specifications for Flatpack table changed the description from: “V_OUT
Accuracy, Post Rad”, to: “V_OUT Accuracy at TA = +25°C, Post Radiation”.
For parameters V_OA (rows 2, 3, 4) in Electrical Specifications for Flatpack table added “Note 10" to
Conditions column.
Removed reference to TB493 as this is not applicable to hermetic packages.
-On page 6:
Changed Electrical Specification for Die note from: “Boldface limits apply over the operating temperature
range, -55°C to +125°C and radiation.” To: “Boldface limits apply after radiation at 25°C or across the
operating temperature range, -55°C to +125°C without radiation, unless otherwise specified.
For parameter V_OA (row 4) in Electrical Specifications for Die table changed the description from: “V_OUT
Accuracy, Post Rad”, to: “V_OUT Accuracy at TA = +25°C, Post Radiation”.
For parameters V_OA for Post Rad (row 4) in Electrical Specifications for Die table added “Note 11” to
Conditions column.
-Updated POD K8.A to the latest revision changes are as follows:
Modified Note 2 by adding the words “...in addition to or instead of...”
December 2, 2013
FN8588.2 Electrical spec table on page 5 (Flatpack) and page 6 (Die): V_OUT Accuracy Post Rad section, changed the value
for Min from -0.2 to -0.3 and Max from +0.2 to +0.3
October 9, 2013
FN8588.1 Initial Release.
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support.
Submit Document Feedback ₁₂
FN8588.3
March 15, 2016