HD-15530 Datasheet, PDF (12/12 Pages) Intersil Corporation – CMOS Manchester Encoder-Decoder

Die Characteristics
DIE DIMENSIONS:
155 x 195 x 19mils
METALLIZATION:
Type: Si-Al
Thickness: 11kÅ ±2kÅ
HD-15530
GLASSIVATION:
Type: SiO₂
Thickness: 8kA ±1kÅ
WORST CASE CURRENT DENSITY:
1.8 x 10⁵ A/cm²
Metallization Mask Layout
TAKE DATA
SERIAL DATA OUT
ENCODER
SHIFT CLK
HD-15530
VALID ^VCC
WORD
ENCODER CLK
SEND CLK IN
DECODER CLK
BIPOLAR ZERO IN
BIPOLAR ONE IN
UNIPOLAR DATA IN
DECODER SHIFT CLK
SEND DATA
SYNC SELECT
ENCODER ENABLE
SERIAL DATA IN
BIPOLAR ONE OUT
OUTPUT INHIBIT
COMMAND/DATA SYNC
DECODER
RESET
GND MASTER
RESET
÷ 6 OUT
BIPOLAR ZERO OUT
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate
and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
5-153