82C88 Datasheet, PDF (10/10 Pages) Intersil Corporation – CMOS Bus Controller

Die Characteristics
DIE DIMENSIONS:
103.5 x 116.5 x 19 ± 1mils
METALLIZATION:
Type: Si - Al
Thickness: 11kÅ ± 2kÅ
Metallization Mask Layout
S1
CLK
82C88
GLASSIVATION:
Type: Nitrox
Thickness: 10kÅ
WORST CASE CURRENT DENSITY:
1.9 x 10⁵ A/cm²
82C88
IOB
V_CC
S0
S2
DT/R
ALE
AEN
MRDC
MCE/
PDEN
DEN
CEN
INTA
AMWC
MWTC
GND
IOWC
AIOWC
IORC
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate
and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
Sales Office Headquarters
NORTH AMERICA
Intersil Corporation
P. O. Box 883, Mail Stop 53-204
Melbourne, FL 32902
TEL: [phone]
FAX: [phone]
EUROPE
Intersil SA
Mercure Center
100, Rue de la Fusee
1130 Brussels, Belgium
TEL: [phone]
FAX: [phone]
ASIA
Intersil (Taiwan) Ltd.
Taiwan Limited
7F-6, No. 101 Fu Hsing North Road
Taipei, Taiwan
Republic of China
TEL: [phone]
FAX: [phone]
4-342