ISL24011 Datasheet, PDF (1/9 Pages) Intersil Corporation – High Voltage TFT-LCD Logic Driver

®
Data Sheet
ISL24011
Octal Voltage Level Shifter for TFT/LCD Panels
October 21, 2005
FN6196.0
High Voltage TFT-LCD Logic Driver
The ISL24011 is a high voltage TFT-LCD logic driver with
+40V and -20V output voltage swing capability. It is
manufactured using Intersil’s proprietary monolithic high
voltage bipolar process and is capable of driving a 4700pF
load in 500ns.
The ISL24011 will level shift a digital input signal to an output
voltage nearly equal to its output supply voltages. The
ISL24011 has 3 supplies. V_ON1 and V_ON2 are positive
supplies with a voltage range between +10V and +40V.
V_OFF is the negative supply with a voltage range between
-5V and -20V. Outputs 1 through 6 are connected to V_ON1
and V_OFF. Outputs 7 and 8 are connected to V_ON2 and
V_OFF. This configuration enables outputs 1 through 6 to
provide slicing to the row drivers to reduce flicker, and
outputs 7 and 8 to control possible supply lines. V_ON2
should remain constant. It is possible to tie V_ON1 and V_ON2
supplies together, if independent control as described above
is not desired. V_ON2 is required to be greater than or equal
to V_ON1 at all times.
The ISL24011 is available in a 20 Ld TSSOP package. It is
specified for operation over the -40°C to +85°C industrial
temperature range.
Ordering Information
PART
PART
TEMP.
PKG.
NUMBER MARKING RANGE (°C) PACKAGE DWG. #
ISL24011IVZ 24011IVZ -40 to +85 20 Ld TSSOP M20.173
(Note)
(Pb-free)
ISL24011IVZ-T 24011IVZ
(Note)
-40 to +85 20 Ld TSSOP M20.173
(Pb-free)
Tape & Reel
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Features
• 0V to 5.5V Input Voltage Range
• +40V and -20V Output Voltage Range
• 10mA Output Continuous Current (all 8 channels)
• 25mA Output Peak Current (all 8 channels)
• Rise/Fall Times 260ns/290ns
• Propagation Delay 230ns
• 50kHz Input Logic Frequency
• 20 Ld TSSOP Pb-Free Package
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• TFT-LCD panels
Pinout
ISL24011 (20 LD TSSOP)
TOP VIEW
GND 1
IN1 2
IN2 3
IN3 4
IN4 5
IN5 6
IN6 7
IN7 8
IN8 9
V_OFF 10
20 V_ON1
19 OUT1
18 OUT2
17 OUT3
16 OUT4
15 OUT5
14 OUT6
13 OUT7
12 OUT8
11 V_ON2
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2005. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.