ICL7662_06 Datasheet, PDF (1/10 Pages) Intersil Corporation – CMOS Voltage Converter

®
POI^DSNSa_TOI^t_EB^{aBRLSSSEhOILSeLUeIECtBTLSE7T6PI6TR0UOXTDXEXUPCSRTEORDIEUSCT January 9, 2006}
ICL7662
FN3181.4
CMOS Voltage Converter
The Intersil ICL7662 is a monolithic high-voltage CMOS
power supply circuit which offers unique performance ad-
vantages over previously available devices. The ICL7662
performs supply voltage conversion from positive to negative
for an input range of +4.5V to +20.0V, resulting in
complementary output voltages of -4.5V to -20V. Only 2
noncritical external capacitors are needed for the charge
pump and charge reservoir functions. The ICL7662 can also
function as a voltage doubler, and will generate output
voltages up to +38.6V with a +20V input.
Contained on chip are a series DC power supply regulator,
RC oscillator, voltage level translator, four output power
MOS switches. A unique logic element senses the most
negative voltage in the device and ensures that the output N-
Channel switch source-substrate junctions are not forward
biased. This assures latchup free operation.
The oscillator, when unloaded, oscillates at a nominal
frequency of 10kHz for an input supply voltage of 15.0V.
This frequency can be lowered by the addition of an external
capacitor to the “OSC” terminal, or the oscillator may be
overdriven by an external clock.
The “LV” terminal may be tied to GROUND to bypass the
internal series regulator and improve low voltage (LV)
operation. At medium to high voltages (+10V to +20V), the
LV pin is left floating to prevent device latchup.
Pinouts
ICL7662CBD-0 (SOIC)
TOP VIEW
TEST 1
NC 2
CAP+ 3
NC 4
GND 5
NC 6
CAP- 7
14 V+
13 OSC
12 NC
11 LV
10 NC
9 NC
8 V_OUT
Features
• No External Diode Needed Over Entire Temperature
Range
• Pin Compatible With ICL7660
• Simple Conversion of +15V Supply to -15V Supply
• Simple Voltage Multiplication (V_OUT = (-)nV_IN)
• 99.9% Typical Open Circuit Voltage Conversion
Efficiency
• 96% Typical Power Efficiency
• Wide Operating Voltage Range 4.5V to 20.0V
• Easy to Use - Requires Only 2 External Non-Critical
Passive Components
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• On Board Negative Supply for Dynamic RAMs
• Localized µProcessor (8080 Type) Negative Supplies
• Inexpensive Negative Supplies
• Data Acquisition Systems
• Up to -20V for Op Amps
ICL7662CBD AND IBD (SOIC)
TOP VIEW
NC 1
TEST 2
NC 3
CAP+ 4
GND 5
NC 6
NC 7
14 V+
13 NC
12 OSC
11 LV
10 NC
9 V_OUT
8 CAP-
ICL7662 (PDIP)
TOP VIEW
TEST 1
CAP+ 2
GND 3
CAP- 4
8 V+
7 OSC
6 LV
5 V_OUT
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2002, 2005, 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.