HCTS283MS Datasheet, PDF (1/9 Pages) Intersil Corporation – Radiation Hardened 4 Bit Binary Full Adder with Fast Carry

TM
HCTS283MS
September 1995
Radiation Hardened
4 Bit Binary Full Adder with Fast Carry
Features
• 3 Micron Radiation Hardened CMOS SOS
• Total Dose 200K RAD (Si)
• SEP Effective LET No Upsets: >100 MEV-cm²/mg
• Single Event Upset (SEU) Immunity < 2 x 10^-9 Errors/
Bit-Day (Typ)
• Dose Rate Survivability: >1 x 10¹² RAD (Si)/s
• Dose Rate Upset >10¹⁰ RAD (Si)/s 20ns Pulse
• Latch-Up Free Under Any Conditions
• Military Temperature Range: -55^oC to +125^oC
• Significant Power Reduction Compared to LSTTL ICs
Pinouts
16 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T16, LEAD FINISH C
TOP VIEW
S1 1
B1 2
A1 3
S0 4
A0 5
B0 6
CIN 7
GND 8
16 VCC
15 B2
14 A2
13 S2
12 A3
11 B3
10 S3
9 COUT
• DC Operating Voltage Range: 4.5V to 5.5V
• LSTTL Input Compatibility
- VIL = 0.8V Max
- VIH = VCC/2V Min
• Input Current Levels Ii ≤ 5µA at VOL, VOH
16 LEAD CERAMIC METAL SEAL
FLATPACK PACKAGE (FLATPACK)
MIL-STD-1835 CDIP2-T16, LEAD FINISH C
TOP VIEW
Description
S1
B1
The Intersil HCTS283MS is a Radiation Hardened 4 bit
A1
binary full adder with fast carry that adds two 4 bit binary
numbers and generates a carry-out bit if the sum exceeds 15.
S0
A0
This device can be used in positive or negative logic. When
B0
using positive logic the carry-in input must be tied low, if
there is no carry-in.
CIN
GND
The HCTS283MS utilizes advanced CMOS/SOS technology
to achieve high-speed operation. This device is a member of
radiation hardened, high-speed, CMOS/SOS Logic Family .
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
VCC
B2
A2
S2
A3
B3
S3
COUT
The HCTS283MS is supplied in a 16 lead Ceramic flatpack
(K suffix) or a SBDIP Package (D suffix).
Ordering Information
PART NUMBER
HCTS283DMSR
HCTS283KMSR
HCTS283D/Sample
HCTS283K/Sample
HCTS283HMSR
TEMPERATURE RANGE
-55^oC to +125^oC
-55^oC to +125^oC
+25^oC
+25^oC
+25^oC
SCREENING LEVEL
Intersil Class S Equivalent
Intersil Class S Equivalent
Sample
Sample
Die
PACKAGE
16 Lead SBDIP
16 Lead Ceramic Flatpack
16 Lead SBDIP
16 Lead Ceramic Flatpack
Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002. All Rights Reserved
1
Spec Number 518641
FN3381.1