HCS241MS Datasheet, PDF (1/9 Pages) Intersil Corporation – Radiation Hardened Inverting Octal Three-State Buffer/Line Driver

HCS241MS
September 1995
Radiation Hardened Inverting
Octal Three-State Buffer/Line Driver
Features
Pinouts
• 3 Micron Radiation Hardened SOS CMOS
• Total Dose 200K RAD (Si)
• SEP Effective LET No Upsets: >100 MEV-cm²/mg
• Single Event Upset (SEU) Immunity < 2 x 10^-9 Errors/
Bit-Day (Typ)
• Dose Rate Survivability: >1 x 10¹² RAD (Si)/s
• Dose Rate Upset >10¹⁰ RAD (Si)/Sec. 20ns Pulse
• Latch Up Free Under Any Conditions
• Military Temperature Range: -55^oC to +125^oC
• Significant Power Reduction Compared to LSTTL ICs
• DC Operating Voltage Range: 4.5V to 5.5V
• Input Logic Levels
- VIL = 30% VCC Max
- VIH = 70% VCC Min
• Input Compatibility Levels Ii ≤ 5µA at VOL, VOH
20 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T20, LEAD FINISH C
TOP VIEW
AE ¹
AI1 2
BO4 3
AI2 4
BO3 5
AI3 6
BO2 7
AI4 ⁸
BO1 ⁹
GND 10
20 VCC
19 BE
18 AO1
17 BI4
16 AO2
15 BI3
14 AO3
13 BI2
12 _AO4
11 BI1
20 LEAD CERAMIC METAL SEAL
FLATPACK PACKAGE (FLATPACK)
MIL-STD-1835 CDFP4-F20, LEAD FINISH C
TOP VIEW
Description
AE
AI1
The Intersil HCS241MS is a Radiation Hardened inverting
BO4
octal three-state buffer/line driver with two output enables,
AI2
one active low, and one active high.
BO3
The HCS241MS utilizes advanced CMOS/SOS technology
AI3
to achieve high-speed operation. This device is a member of
BO2
radiation hardened, high-speed, CMOS/SOS Logic Family.
AI4
BO1
The HCS241MS is supplied in a 20 lead ceramic flatpack
GND
(K suffix) or a SBDIP package (D suffix).
1
20
2
19
3
18
4
17
5
16
6
15
7
14
8
13
9
12
10
11
VCC
BE
AO1
BI4
AO2
BI3
AO3
BI2
AO4
BI1
Ordering Information
PART NUMBER
HCS241DMSR
HCS241KMSR
HCS241D/Sample
HCS241K/Sample
HCS241HMSR
TEMPERATURE RANGE
-55^oC to +125^oC
-55^oC to +125^oC
+25^oC
+25^oC
+25^oC
SCREENING LEVEL
Intersil Class S Equivalent
Intersil Class S Equivalent
Sample
Sample
Die
PACKAGE
20 Lead SBDIP
20 Lead Ceramic Flatpack
20 Lead SBDIP
20 Lead Ceramic Flatpack
Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
302
Spec Number 518838
File Number 3122.1