FMCE-0828_11 Datasheet, PDF (7/11 Pages) Interpoint Corporation Company – EMI Input Filters 28 Volt input – 8 Amp

Crane Aerospace & Electronics Power Solutions
FMCE-0828 EMI Input Filters – Cases
28 Volt input – 8 Amp
BOTTOM VIEW CASE F5
Seam Seal
1.350 max. (34.29)
Squared corner and dot
on top of case indicates pin one
1.170
(29.72)
0.040 dia.
1
2
(1.02)
5
0.170
(4.32)
0.000
4
3
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places
±0.01 (0.3) for two decimal places
unless otherwise specified
CAUTION
Heat from reflow or wave soldering may damage the device.
Solder pins individually with heat application not exceeding 300°C for 10 seconds per pin.
Materials
Header Cold Rolled Steel/Nickel/Gold
Cover Kovar/Nickel
Pins
#52 alloy/Gold ceramic seal
Seal hole 0.120 ±0.002 (3.05 ± 0.05)
Case F5 FMCE-0828, Rev D, 20100429
Please refer to the numerical dimensions for accuracy.
Figure 11: Case F5
www.craneae.com/interpoint
Page 7 of 11
FMCE-0828 Rev J - 2011.09.08