FMCE-0828_11 Datasheet, PDF (11/11 Pages) Interpoint Corporation Company – EMI Input Filters 28 Volt input – 8 Amp

Crane Aerospace & Electronics Power Solutions
FMCE-0828 EMI Input Filters
28 Volt input – 8 Amp
stanDarD anD /es (non-Qml) anD /883 (Class h, Qml)
mil-PrF-38534 enVironmental sCreening
test PerFormeD
pre-cap inspection, Method 2017, 2032
temperature cycle (10 times)
Method 1010, Cond. C, -65°C to +150°C, ambient
Method 1010, Cond. B, -55°C to +125°C, ambient
constant acceleration
Method 2001, 3000 g
Method 2001, 500 g
Burn-in Method 1015, +125°c case, typical ²
96 hours
160 hours
Final electrical test, Mil-prF-38534, group a,
Subgroups 1 through 6, -55°C, +25°C, +125°C case
Subgroups 1 and 4, +25°C case
Hermeticity test
Gross Leak, Method 1014, Cond. C
Fine Leak, Method 1014, Cond. A
Gross Leak, Dip
Final visual inspection, Method 2009
non-Qml ¹
stanDarD
/es












Qml
/883









Test methods are referenced to MIL-STD-883 as determined by MIL-PRF-38534.
Notes:
1. Standard and /ES, non-QML products, may not meet all of the requirements of MIL-PRF-38534.
2. Burn-in temperature designed to bring the case temperature to +125°C minimum. Burn-in is a powered test.
scReenIng table 7: envIROnMental scReenIng—hIgh RelIabIlItY standaRd, /es and /883 (class h)
Screening Table 2: Environmental Screening
FMCE-0828 EMI Input Filters, FMCE-0828 Rev J - 2011.09.08. This revision supersedes all previous releases. All technical information is believed
to be accurate, but no responsibility is assumed for errors or omissions. Crane Electronics, Inc. reserves the right to make changes in products or
specifications without notice. Interpoint and FMCE-0828 are trademarks of Crane Electronics, Inc. Copyright © 1999 - 2011 Crane Electronics, Inc.
All rights reserved. www.craneae.com/interpoint
Page 11 of 11