FMCE-0828 Datasheet, PDF (3/11 Pages) Interpoint Corporation Company – Attenuation to 60 dB at 500 kHz, typical MIL-STD-461C CE03

Crane Aerospace & Electronics Power Solutions
FMCE-0828 EMI Input Filters
28 Volt input – 8 Amp
Pin Out down-Leaded Model
PIN OUT
Pin
Designation
1
Positive Input
2
Positive Output
3
Output Common
4
Case Ground ¹
5
Input Common
Note
1. Although the down-leaded packages can be
connected to chassis ground with the case
ground lead, direct contact of the base plate to
chassis improves EMI performance.
Squared corner and dot on top
of package indicate pin one.
1
2
BOTTOM VIEW
FMCE-0828
See case F5 and J6 for dimensions.
5
4
3
Dotted line shows flanged package option.
Figure 3: Pin Out FMCE-0828
Pin Out Side-Leaded model
PIN OUT
Pin
Designation
1, 2, 3 Positive Input
4, 5, 6 Input Common
7, 8, 9 Output Common
10, 11, 12 Positive Output
Bottom of
case
Case Ground
Notes
1. All pins must be connected.
2. The baseplate is the only case ground connection and
should directly contact chassis ground.
Angled corner and cover marking indicate pin one.
TOP VIEW
1
FMCE-0828
12
2
11
3 _{Outline shown is case U. Designator “SL” is}
10
4 ^{required in Case Option position of model number} 9
5
8
6
7
Figure 3: Pin Out FMCE-0828-SL
www.interpoint.com
Page 3 of 11
FMCE-0828 Rev E - 20100427