82541ER_13 Datasheet, PDF (2/51 Pages) Intel Corporation – 82541ER Gigabit Ethernet Controller

Revision History
Date
Aug 2003
Mar 2004
Oct 2004
Nov 2004
Jan 2005
Feb 2005
Apr 2005
July 2005
Aug 2005
June 2006
June 2006
Aug 2006
Sept 2006
Aug 2007
June 2008
Revision
2.0
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
Notes
Non-classified release.
Updated Section 4, “Voltage, Temperature, and Timing Specifications,” for the C-0
stepping.
• Corrected EEMODE signal description.
• Updated signal names to match design guide and reference schematics.
• Added lead free information.
• Added information about migrating from a 2-layer 0.36 mm wide-trace substrate to
a 2-layer 0.32 mm wide-trace substrate. Refer to the section on Package and
Pinout Information.
• Added statement that no changes to existing soldering processes are needed for
the 2-layer 0.32 mm wide-trace substrate change in the section describing
“Package Information”.
• Corrected pinout discrepancies between sections “Signal Descriptions” and
“Package and Pinout Information”.
• Added new maximum values for DC supply voltages on 1.2 V and 1.8 V pins. See
Table 2, Recommended Operating Conditions and Table 6, DC Characteristics.
• Updated Visual Pin Assignment diagram for pinouts F9, F10, E14, F14, and H14.
• Removed all references to CLK_RUN# signal.
• Corrected the FLSH_SO/LAN_DISABLE signal definition. If Flash functionality is
not used then an external pull-down resistor is required.
• Added pin C8 description to Table 29 and Table 31.
• Corrected 25 MHz Clock Input Requirements in Table 13.
• Corrected the FLSH_SO/LAN_DISABLE signal definition. If Flash functionality is
not used then an external pull-up resistor is required.
• Updated Table 13 “25 MHz Clock Input Requirements”.
• Updated Table 40 descriptions for pins A10, B10, and C9.
• Updated pinout descriptions from Tables 25 - 42 to match Figure 13.
• Removed note “b” from Table 2 and note “a” from Tables 3 and 4. Moved the note
following Table 5 before Table 3 “3.3V Supply Voltage Ramp”
• Added new Intel logo, updated “Product Features”, and added new document
ordering information to copyright page.
• Clarified product ordering codes.
Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual
property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability
whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not
intended for use in medical, life saving, or life sustaining applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for
future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
The 82541ER Gigabit Ethernet Controller may contain design defects or errors known as errata which may cause the product to deviate from
published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be obtained from:
Intel Corporation
P.O. Box 5937
Denver, CO 80217-9808
or call in North America 1-800-548-4725, Europe 44-0-1793-431-155, France 44-0-1793-421-777, Germany 44-0-1793-421-333, other Countries 708-
296-9333.
Intel® is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.
Copyright © Intel Corporation, 2008
*Third-party brands and names are the property of their respective owners.
ii