GD82541PI Datasheet, PDF (19/46 Pages) Intel Corporation – 82541 Family of Gigabit Ethernet Controllers

Networking Silicon — 82541(PI/GI/EI)
4.0
Voltage, Temperature, and Timing Specifications
4.1
Absolute Maximum Ratings
Table 1. Absolute Maximum Ratings^a
Symbol
VDD (3.3)
VDD (1.8)
VDD (1.2)
VDD
VI / VO
IO
Parameter
DC supply voltage on 3.3 V pins
with respect to VSS
DC supply voltage on 1.8 V pins
with respect to VSS
DC supply voltage on 1.2 V pins
with respect to VSS
DC supply voltage
Input voltage
Output current
Min
VSS - 0.5
VSS - 0.5
VSS - 0.5
VSS - 0.5
VSS - 0.5
Max
4.6
2.5 or
VDD (1.8) + 0.5^b
1.7 or
VDD (1.2) + 0.5^c
4.6
4.6^d
40
Unit
V
V
V
V
V
mA
TSTG
Storage temperature range
ESD per MIL_STD-883 Test
Method 3015, Specification 2001V
Latchup Over/Undershoot: 150
mA, 125 C
-40
125
°C
VDD overstress:
VDD (3.3) * (7.2 V)
V
a. Maximum ratings are referenced to ground (VSS). Permanent device damage is likely to occur if the ratings in this table are
exceeded. These values should not be used as the limits for normal device operations.
b. The maximum value is the lesser value of 2.5 V or VDD (2.5) + 0.5 V. This specification applies to biasing the device to a
steady state for an indefinite duration.
c. The maximum value is the lesser value of 1.7 V or VDD (2.5) + 0.5 V.
d. The maximum value must also be less than VIO.
4.2
4.2.1
Targeted Recommended Operating Conditions
General Operating Conditions
Table 2. Recommended Operating Conditions (Sheet 1 of 2)^a
Symbol
VDD (3.3)
VDD (1.8)
VDD (1.2)
VIO
tR / tF
Parameter
DC supply voltage on 3.3 V pins
DC supply voltage on 1.8 V pins
DC supply voltage on 1.2 V pins
PCI bus reference voltage
Input rise/fall time (normal input)
Min
3.0
1.71^b
1.14^d
3.0
0
Max
3.6
1.89^c
1.26^e
5.25
200
Unit
V
V
V
V
ns
19