UPI-41AH Datasheet, PDF (1/20 Pages) Intel Corporation – UNIVERSAL PERIPHERAL INTERFACE 8-BIT SLAVE MICROCONTROLLER

UPI-41AH 42AH
UNIVERSAL PERIPHERAL INTERFACE
8-BIT SLAVE MICROCONTROLLER
Y UPI-41 6 MHz UPI-42 12 5 MHz
Y Pin Software and Architecturally
Compatible with all UPI-41 and UPI-42
Products
Y 8-Bit CPU plus ROM OTP EPROM RAM
I O Timer Counter and Clock in a
Single Package
Y 2048 x 8 ROM OTP 256 x 8 RAM on
UPI-42 1024 x 8 ROM OTP 128 x 8
RAM on UPI-41 8-Bit Timer Counter 18
Programmable I O Pins
Y One 8-Bit Status and Two Data
Registers for Asynchronous Slave-to-
Master Interface
Y DMA Interrupt or Polled Operation
Supported
Y Fully Compatible with all Intel and Most
Other Microprocessor Families
Y Interchangeable ROM and OTP EPROM
Versions
Y Expandable I O
Y Sync Mode Available
Y Over 90 Instructions 70% Single Byte
Y Available in EXPRESS
Standard Temperature Range
Y inteligent Programming Algorithm
Fast OTP Programming
Y Available in 40-Lead Plastic and 44-
Lead Plastic Leaded Chip Carrier
Packages
(See Packaging Spec Order 240800-001)
Package Type P and N
The Intel UPI-41AH and UPI-42AH are general-purpose Universal Peripheral Interfaces that allow the designer
to develop customized solutions for peripheral device control
They are essentially ‘‘slave’’ microcontrollers or microcontrollers with a slave interface included on the chip
Interface registers are included to enable the UPI device to function as a slave peripheral controller in the MCS
Modules and iAPX family as well as other 8- 16- and 32-bit systems
To allow full user flexibility the program memory is available in ROM and One-Time Programmable EPROM
(OTP) All UPI-41AH and UPI-42AH devices are fully pin compatible for easy transition from prototype to
production level designs
210393 – 2
Figure 1 DIP Pin Configuration
November 1994
210393 – 3
Figure 2 PLCC Pin Configuration
Order Number 210393-008