IA186EB Datasheet, PDF (19/85 Pages) InnovASIC, Inc – 8-Bit/16-Bit Microcontrollers

IA186EB/IA188EB
8-Bit/16-Bit Microcontrollers
Data Sheet
July 10, 2011
2.1.6 PQFP Physical Dimensions
The physical dimensions for the 80 PQFP are as shown in Figure 6.
Notes:
1. Dimension D1 and E1 do not include mold protrusion.
Allowable protrusion is 0.25mm per side. Dimension D1
and E1 do not include mold mismatch and are determined
a datum plane –H– .
2. Dimension b does not include dambar protrusion.
Allowable dambar protrusion will not cause the lead width
to exceed the maximum b dimension by more than
0.08mm. Dambar cannot be located on the lower radius of
the lead foot.
Legend:
Millimeter
Inch
Symbol Min Nom Max Min Nom Max
A – – 3.40 – – 0.134
A1 0.25 – – 0.010 – –
A2 2.55 2.72 3.05 0.100 0.107 0.120
D 23.90 Basic 0.941 Basic
D1 20.00 Basic 0.787 Basic
E 17.90 Basic 0.705 Basic
E1 14.00 Basic 0.551 Basic
R2 0.013 – 0.30 0.005 – 0.012
R1 0.013 – – 0.005 – –
θ 0° 3.5° 7° 0° 3.5° 7°
θ1 0° – – 0° – –
θ2, θ3^{a 7° REF}
7° REF
θ2, θ3^{b 15° REF}
15° REF
c 0.11 0.15 0.23 0.004 0.006 0.009
L 0.73 0.88 1.03 0.029 0.035 0.041
L1
1.95 REF
0.077 REF
S 0.40 – – 0.016 – –
b 0.30 0.35 0.45 0.012 0.014 0.018
e
0.80 BSC
0.031 BSC
D2 18.40 REF
0.724
E2 12.00 REF
0.472
Tolerances of Form and Position
aaa
0.25
0.010
bbb
0.20
0.008
ccc
0.20
0.008
a_{Alloy 42 L/F.}
b_{Copper L/F.}
Figure 6. 80-Pin PQFP Physical Package Dimensions
IA211080314-13
UNCONTROLLED WHEN PRINTED OR COPIED
Page 19 of 85
http://www.Innovasic.com
Customer Support:
1-888-824-4184