TLE7233G_15 Datasheet, PDF (9/33 Pages) Infineon Technologies AG – 4 channel low-side driver with limp home

SPI Driver for Enhanced Relay Control
SPIDER - TLE7233G
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
T_J = -40 °C to +150 °C; V_DD = 3.0 V to V_DDA, V_DDA = 4.5 V to 5.5 V.
All voltages with respect to ground, positive current flowing into pin (unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values Unit Conditions
Min.
Max.
Power Supply
4.1.1 Digital supply voltage
4.1.2 Analog supply voltage
Power Stages
V_DD
-0.3
5.5
V_DDA
-0.3
5.5
V–
V–
4.1.3
4.1.4
Load current
I_D
Output voltage for short circuit protection V_D
(single pulse)
-0.5
0.5
–
36
A–
V–
4.1.5
4.1.6
Voltage at power transistor
Maximum energy dissipation one
channel
V_DS
–
E_AS
41
V active clamped
mJ
– ²⁾
single pulse
single pulse
repetitive (1 · 10⁴ cycles)
repetitive (1 · 10⁶ cycles)
Logic Pins
–
65
–
30
E_AR
–
18
–
13
T_J(0) = 85 °C
I_D(0) = 0.35 A
T_J(0) = 150 °C
I_D(0) = 0.25 A
T_J(0) = 150 °C
I_D(0) = 0.25 A
T_J(0) = 150 °C
I_D(0) = 0.17 A
4.1.7 Voltage at input pins
4.1.8 Voltage at LHI pin
4.1.9 Voltage at reset pin
4.1.10 Voltage at chip select pin
4.1.11 Voltage at serial clock pin
4.1.12 Voltage at serial input pin
4.1.13 Voltage at serial output pin
Temperatures
V_IN0..3
-0.3
V_LHI
-0.3
V_RST
-0.3
V_CS
-0.3
V_SCLK
-0.3
V_SI
-0.3
V_SO
-0.3
5.5
V–
5.5
V–
V_DD + 0.3 V
– ³⁾
V_DD + 0.3 V
– ³⁾
V_DD + 0.3 V
– ³⁾
V_DD + 0.3 V
– ³⁾
V_DD + 0.3 V
– ³⁾
4.1.14 Junction Temperature during operation T_J
-40
4.1.15 Storage Temperature
T_STG
-55
150
°C –
150
°C –
Datasheet
9
Rev. 1.2, 2014-05-09