TLE7233G_15 Datasheet, PDF (10/33 Pages) Infineon Technologies AG – 4 channel low-side driver with limp home

SPI Driver for Enhanced Relay Control
SPIDER - TLE7233G
General Product Characteristics
Absolute Maximum Ratings (cont’d)¹⁾
T_J = -40 °C to +150 °C; V_DD = 3.0 V to V_DDA, V_DDA = 4.5 V to 5.5 V.
All voltages with respect to ground, positive current flowing into pin (unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values Unit Conditions
Min.
Max.
ESD Susceptibility
4.1.16 ESD Resistivity
OUTn vs. GND
V_ESD
-4
4
kV HBM⁴⁾
all other pins
-2
2
1) Not subject to production test, specified by design.
2) Pulse shape represents inductive switch off: I_D(t) = I_D(0) × (1 - t / t_pulse); 0 < t < t_pulse
3) V_DD + 0.3 V < 5.5 V
4) ESD susceptibility, HBM according to ANSI/ESDA/JEDEC JS-001-2010
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
4.2
Functional Range
Pos.
4.2.1
4.2.2
4.2.3
4.2.4
4.2.5
Parameter
Symbol
Digital supply voltage
Analog supply voltage
Digital supply current all channels
ON
V_DD
V_DDA
I_DD(ON)
Analog supply current all channels I_DDA(ON)
ON
Analog supply turn-ON time
t_DDA(ON)
Limit Values
Min.
Max.
3.0
5.5
4.5
5.5
–
100
–
3
15
–
Unit Conditions
V
–
V
–
µA –
mA –
µs
V_DDA = 0V to 5V
(linear)
Note: Within the functional range the IC operates as described in the circuit description. The electrical
characteristics are specified within the conditions given in the related electrical characteristics table.
Datasheet
10
Rev. 1.2, 2014-05-09