TLE8080EM Datasheet, PDF (8/39 Pages) Infineon Technologies AG – Engine Management IC for Small Engines

TLE8080EM
General Product Characteristics
Notes
1. Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
2. Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are not
designed for continuous repetitive operation.
Table 2 Functional Range
Parameter
Symbol
Supply Voltage
V_S
Junction Temperature
T_j
Min.
6
-40
Values
Typ. Max.
–
18
–
150
Unit Note /
Number
Test Condition
V
–
°C –
4.5.1
4.5.2
Note: Within the functional range the IC operates as described in the circuit description. The electrical
characteristics are specified within the conditions given in the related electrical characteristics table.
Table 3 Thermal Resistance
Parameter
Symbol
Values
Unit Note /
Number
Min. Typ. Max.
Test Condition
Junction to Case
Junction to Ambient
R_thJC
R_thJA
–
7
–
K/W ¹⁾
–
29
–
K/W ^{1) 2)}
4.6.1
4.6.2
1) Not subject to production test, specified by design
2) Specified R_thJA value is according to Jedec JESD51-2,-5,-7 at natural convection on FR4 2s2p board; The Product
(Chip+Package) was simulated on a 76.2 x 114.3 x 1.5 mm board with 2 inner copper layers (2 x 70µm Cu, 2 x 35µm Cu).
Where applicable a thermal via array under the exposed pad contacted the first inner copper layer.
Data Sheet
8
Rev. 1.1, 2012-10-19