TLE4678 Datasheet, PDF (8/31 Pages) Infineon Technologies AG – Low Drop Out Linear Voltage Regulator 5 V Fixed Output Voltage

TLE4678
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
T_j = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values
Unit Conditions
Min.
Max.
Voltage Rating
4.1.1
Regulator Input and IC
V_I
Supply I
-42
45
V–
4.1.2
4.1.3
4.1.4
Regulator Output Q
V_Q
Reset Output RO
V_RO
Reset Delay and Watchdog V_D
Timing D
-1
7
-0.3
7
-0.3
7
V–
V–
V–
4.1.5
Reset Switching Threshold V_RADJ
-0.3
7
Adjust RADJ
V–
4.1.6 Watchdog Input WI
V_WI
-0.3
7
4.1.7 Watchdog Output WO
V_WO
-0.3
7
4.1.8 Watchdog Activating
V_WADJ
-0.3
7
Threshold Adjust WADJ
V–
V–
V–
Temperature
4.1.9 Junction Temperature
T_j
-40
150
°C –
4.1.10 Storage Temperature
T_stg
-55
150
°C –
ESD Susceptibility
4.1.11 ESD Resistivity
V_ESD,HBM -3
3
kV Human Body Model ²⁾
Pin 13 (Input) only.
4.1.12
-2
2
kV Human Body Model ²⁾
All pins except pin 13 (Input)
4.1.13
V_ESD,CDM -1
1
kV Charged Device Model ³⁾
1) Not subject to production test, specified by design.
2) ESD susceptibility, Human Body Model “HBM” according to EIA/JESD 22-A114B.
3) ESD susceptibility, Charged Device Model “CDM” according to EIA/JESD22-C101 or ESDA STM5.3.1.
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Datasheet
8
Rev. 1.1, 2009-08-27