English
Language : 

TLE4206-4G Datasheet, PDF (8/16 Pages) Infineon Technologies AG – H-Bridge Driver Headlight Beam Controller
TLE 4206-4G
General Product Characteristics
4.4
Electrical Characteristics
Electrical Characteristics
VS= 8 V to 18 V, Tj = -40 °C to +150 °C, IOUT1-2 = 0 A, all voltages with respect to ground, positive current flowing
into pin (unless otherwise specified)
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min. Typ. Max.
Current Consumption
4.4.1
4.4.2
Supply current
Supply current
IS_no load
–
IS_0.4A
–
4.4.3 Supply current
IS_0.8A
–
Over- and Under Voltage Lockout
12
20
mA no load connected
20
30
mA IOUT1 = 0.4 A;
IOUT2 = -0.4 A
35
50
mA IOUT1 = 0.8 A;
IOUT2 = -0.8 A
4.4.4 UV Switch ON voltage
VUV ON
–
7.4
8
V
VS increasing
4.4.5 UV Switch OFF voltage
VUV OFF
6.3
6.9
–
V
VS decreasing
4.4.6 UV ON/OFF Hysteresis
VUVHY
–
0.5
–
V
VUV ON - VUV OFF
4.4.7 OV Switch OFF voltage
VOV OFF
–
20.5 23
V
VS increasing
4.4.8 OV Switch ON voltage
VOV ON
17.5 20
–
V
VS decreasing
4.4.9 OV ON/OFF Hysteresis
VOVHY
–
0.5
–
V
VOV OFF - VOV ON
Outputs OUT1-2, Saturation Voltages
4.4.10 Source (upper)
IOUT = -0.2 A
4.4.11 Source (upper)
IOUT = -0.4 A
4.4.12 Sink (upper)
IOUT = -0.8 A
4.4.13 Sink (lower)
IOUT = 0.2 A
4.4.14 Sink (lower)
IOUT = 0.4 A
4.4.15 Sink (lower)
IOUT = 0.8 A
4.4.16 Total drop, IOUT = 0.2 A
4.4.17 Total drop, IOUT = 0.4 A
4.4.18 Total drop, IOUT = 0.8 A
Outputs OUT1-2, Clamp Diodes
VSAT U 0.2A –
VSAT U 0.4A –
VSAT U 0.8A –
VSAT L 0.2A –
VSAT L 0.4A –
VSAT L 0.8A –
VSAT 0.2A –
VSAT 0.4A –
VSAT 0.8A –
0.85 1.15 V
0.90 1.20 V
1.10 1.50 V
0.15 0.23 V
0.25 0.40 V
0.45 0.75 V
1.0
1.4
V
1.2
1.7
V
1.6
2.5
V
Tj = 25 °C
VSAT = VSAT U + VSAT L
4.4.19 Forward voltage; upper
VFU
–
1
1.5
V
IF = 0.4 A
4.4.20 Upper leakage current
ILKU
–
–
5
mA
4.4.21 Forward voltage; lower
VFL
–
0.9
1.4
V
Input-Interface, Input REF
4.4.22 Quiescent voltage
4.4.23 Input resistance
VREFq
–
RREF
–
200 –
6
–
mV IREF = 0 µA
kΩ
0 V < VREF < 0.5 V
Data Sheet
8
Rev. 1.0, 2010-08-05