TLE4206-4G Datasheet, PDF (6/16 Pages) Infineon Technologies AG – H-Bridge Driver Headlight Beam Controller

TLE 4206-4G
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
T_j = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values
Unit
Min.
Max.
Voltages
4.1.1
4.1.2
Supply voltage
Supply voltage
V_S1
-0.3
45
V
V_S2
-1
–
V
4.1.3
Logic input voltages
(FB, REF, RANGE, HYST)
V_I
-0.3
20
V
Currents
4.1.4
4.1.5
4.1.6
Output current (OUT1, OUT2)
Output current (Diode)
Input current
(FB, REF, RANGE, HYST)
I_OUT
–
–
A
I_{OUT_DIODE} -1
1
A
I_IN
-2
2
mA
-6
6
mA
Temperatures
4.1.7 Junction Temperature
4.1.8 Storage Temperature
ESD Susceptibility
T_j
-40
T_stg
-50
150
°C
150
°C
4.1.9
ESD resistivity of OUT and VS pin to
V_ESD
-2
2
kV
GND
4.1.10 ESD Resistivity logic pins to GND
V_ESD5,7
-2
2
kV
1) Not subject to production test, specified by design.
2) ESD susceptibility, HBM according to EIA/JESD 22-A114B
Conditions
–
t < 0.5 s;
I_S > -2 A
–
internally limited
–
–
t < 2 ms; t/T < 0.1
–
–
HBM²⁾
HBM²⁾
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
6
Rev. 1.0, 2010-08-05