TLE4206-4G Datasheet, PDF (7/16 Pages) Infineon Technologies AG – H-Bridge Driver Headlight Beam Controller

TLE 4206-4G
General Product Characteristics
4.2
Operating Range
Pos. Parameter
4.2.1 Supply voltage
4.2.2
4.2.3
4.2.4
4.2.5
4.2.6
Supply voltage increasing
Supply voltage decreasing
Output current
Input current (FB, REF)
Junction temperature
Symbol
V_{S_OP}
Limit Values
Min.
Max.
8
18
V_{S_INC}
V_{S_DEC}
I_OUT1-2
I_{IN_op}
T_j
-0.3
-0.3
-0.8
-50
-40
V_{UV ON}
V_{UV OFF}
0.8
500
150
Unit Conditions
V
After V_S rising
above V_{UV ON}
V
Outputs in tristate
V
Outputs in tristate
A
–
µA –
°C
–
Note: Within the functional range the IC operates as described in the circuit description. The electrical
characteristics are specified within the conditions given in the related electrical characteristics table.
4.3
Thermal Resistance
Note: This thermal data was generated in accordance with JEDEC JESD51 standards. For more information, go
to www.jedec.org.
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min. Typ. Max.
4.3.1
4.3.2
Junction to Soldering Point¹⁾
Junction to Ambient¹⁾
minimal-footprint
R_thJSP
–
R_{thJA_minfoot} –
25
–
130 –
K/W measured to pin 5
K/W ²⁾
4.3.3
Junction to Ambient¹⁾
additional 600 mm² CU area
R_{thJA_600mm2} –
65
–
K/W ³⁾
1) Not subject to production test, specified by design.
2) JESD 51-2, 51-3, FR4 76.2 mm × 114.3 mm × 1.5 mm, 70 µm Cu, minimal footprint; Ta=27°C
3) JESD 51-2, 51-3, FR4 76.2 mm × 114.3 mm × 1.5 mm, 70 µm Cu, 600 mm² CU cooling area connected to Pins: 3, 4, 5,
10, 11, 12; Ta=27°C
Data Sheet
7
Rev. 1.0, 2010-08-05