TLE94108EL Datasheet, PDF (71/76 Pages) Infineon Technologies AG – a protected eight-fold half-bridge driver designed especially for automotive motion control applications

TLE94108EL
Application Information
4. Not used (NU) pins and unused outputs are recommended to be left unconnected (open) in the application. If
NU pins or unused output pins are routed to an external connector which leaves the PCB, then these outputs
should have provision for a zero ohm jumper (depopulated if unused) or ESD protection. In other words, NU
and unused pins should be treated like used pins.
5. Place bypass ceramic capacitors as close as possible to the VSx pins, with shortest connections the GND pins
and GND layer, for best EMC performance
Data Sheet
71
1.0
2016-08-27