V23836-C18-C63 Datasheet, PDF (7/13 Pages) Infineon Technologies AG – 1x9 Transceiver with Duplex SC Receptacle Single Mode 1300 nm 21 km SONET OC-3 / SDH STM-1

V23836-C18-C63
V23836-C18-C363
Technical Data
Recommended Operating Conditions
Parameter
Symbol
Values
Unit
min.
typ.
max.
Ambient Temperature
Power Supply Voltage
5V
3.3 V
T_AMB
0
V_CC–V_EE
4.75
5
3.15
3.3
70
°C
V
5.25
3.6
Supply Current¹⁾
I_CC
Transmitter
250
mA
Data Input High Voltage DC/DC V_IH–V_CC
Data Input Low Voltage DC/DC V_IL–V_CC
Input Data Rise/Fall Time
10% - 90%
t_R, t_F
–1100
–2000
0.4
–740
mV
–1580 mV
1.3
ns
Receiver
Input Center Wavelength
λ_C
1100
1600
nm
1) _{For VCC–VEE (min., max.) 50% duty cycle. The supply current does not include the load drive current of the}
receiver output.
The electro-optical characteristics described in the following tables are only valid for use
under the recommended operating conditions.
Transmitter Electro-Optical Characteristics
Parameter
Launched Power (Average)¹⁾
Center Wavelength
Spectral Width (RMS)
Extinction Ratio (Dynamic)
Reset Threshold²⁾
Eye Diagram³⁾
Symbol
P_O
λ_C
σ_l
ER
V_TH
ED
min.
–15
1260
8.2
2.7
Values
typ.
max.
–8
1360
7.7
2.9
Compliant
Unit
dBm
nm
nm
dB
V
1) _{Into single mode fiber, 9 µm diameter.}
2) _{Laser power is shut down if power supply is below VTH min. and switched on if power supply is above VTH max.}
3) _{Transmitter meets ANSI T1E1.2, SONET OC-3 and ITU-T G.957 mask patterns.}
Preliminary Product Information
7
2004-02-13