TLF1963 Datasheet, PDF (7/24 Pages) Infineon Technologies AG – Low Dropout Linear Voltage Post Regulator

TLF1963
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Table 1 Absolute Maximum Ratings ¹⁾
T_j = -40 °C to +150 °C; all voltages with respect to ground (unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values Unit
Min.
Max.
Input, Enable
4.1.1 Voltage
Adjust
V_I, V_EN
-20
20
V
4.1.2 Voltage
Output
V_ADJ
-7
7
V
4.1.3 Voltage
Temperatures
V_Q
-20
20
V
4.1.4 Junction Temperature
4.1.5 Storage Temperature
ESD Susceptibility
T_j
-40
150
°C
T_stg
-50
150
°C
4.1.6 ESD Resistivity
V_ESD
-2
2
kV
4.1.7 ESD Resistivity
V_ESD
1) Not subject to production test, specified by design.
-750
750
V
2) ESD HBM Test according AEC-Q100-002 - JESD22-A114 (1.5 kOhm, 100 pF)
3) ESD susceptibility, Charged Device Model “CDM” EIA/JESD22-C101 or ESDA STM5.3.1
Conditions
–
–
–
–
–
HBM²⁾
CDM³⁾
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
7
Rev. 1.0, 2012-11-08