TLE4675 Datasheet, PDF (7/25 Pages) Infineon Technologies AG – Low Drop Out Linear Voltage Regulator 5V Fixed Output Voltage

TLE4675
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
T_j = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values
Unit Conditions
Min.
Max.
Voltages
4.1.1
Regulator Input and IC Supply I V_I
-42
45
4.1.2 Regulator Output Q
V_Q
-1
7
4.1.3 Reset Output RO
V_RO
-0.3
7
4.1.4 Reset Delay Timing D
V_D
-0.3
7
Temperatures
V–
V–
V–
V–
4.1.5 Junction Temperature
4.1.6 Storage Temperature
ESD Susceptibility
T_j
-40
150
T_stg
-55
150
4.1.7 ESD Resistivity
V_ESD,HBM -4
4
4.1.8
V_ESD,CDM -1
1
1) Not subject to production test, specified by design.
2) ESD susceptibility, HBM according to AEC-Q100-002 - JESD22-A114
3) ESD susceptibility, Charged Device Model “CDM” ESDA STM5.3.1
°C –
°C –
kV Human Body Model ²⁾
kV Charged Device Model ³⁾
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
7
Rev. 1.0, 2008-09-30