TLE42754_08 Datasheet, PDF (7/26 Pages) Infineon Technologies AG – Low Dropout Linear Fixed Voltage Regulator

4
General Product Characteristics
TLE42754
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
-40 °C ≤ T_j ≤ 150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values
Unit
Min.
Max.
Input
4.1.1 Voltage
Output
V_I
-42
45
V
4.1.2 Voltage
Reset Output
V_Q
-0.3
7
V
4.1.3 Voltage
Reset Delay
V_RO
-0.3
25
V
4.1.4 Voltage
Temperature
V_D
-0.3
7
V
4.1.5 Junction Temperature
4.1.6 Storage Temperature
ESD Absorption
T_j
-40
T_stg
-50
150
°C
150
°C
4.1.7 ESD Absorption
V_ESD,HBM -2
2
kV
4.1.8
V_ESD,CDM -500
500
V
4.1.9
-750
750
V
1) Not subject to production test, specified by design.
2) ESD HBM Test according AEC-Q100-002 - JESD22-A114
3) ESD CDM Test according ESDA STM5.3.1
Conditions
–
–
–
–
–
–
Human Body
Model (HBM)²⁾
Charge Device
Model (CDM)³⁾
Charge Device
Model (CDM)³⁾ at
corner pins
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
7
Rev. 1.1, 2008-09-24