V23826-K15-C13 Datasheet, PDF (6/16 Pages) Infineon Technologies AG – Single Mode 1300 nm 1.0625 GBd Fibre Channel 1.3 Gigabit Ethernet 1x9 Transceiver

V23826-K15-Cxx/Cxxx
Technical Data
Recommended Operating Conditions (cont’d)
Parameter
Symbol
Limit Values
Unit
min.
typ.
max.
Receiver
Input Center Wavelength
l_C
1270
1355
nm
1) _{For VCC–VEE (min., max.) 50% duty cycle. The supply current does not include the load drive current of the}
receiver output.
2) _{Peak to peak voltage of one input.}
The electro-optical characteristics described in the following tables are only valid for use
under the recommended operating conditions.
Transmitter Electro-Optical Characteristics
Parameter
Symbol
Limit Values
Unit
min.
typ.
max.
Launched Power (Average)¹⁾ P_O
Center Wavelength
l_C
Spectral Width (RMS)
s_l
Relative Intensity Noise
RIN
–11.0
1270
–3
1355
4
–120
dBm
nm
dB/Hz
Extinction Ratio (Dynamic)
ER
9
dB
Reset Threshold²⁾
5 V V_TH
3.5
V
3.3 V
2.7
Reset Time Out²⁾
t_RES
15
22
35
ms
1) _{Into single mode fiber, 9 µm diameter.}
2) _{Laser power is shut down if power supply is below VTH and switched on if power supply is above VTH after tRES.}
Data Sheet
6
2000-03-09