TLF80511EJ_15 Datasheet, PDF (6/20 Pages) Infineon Technologies AG – Low Dropout Linear Fixed Voltage Regulator

4
General Product Characteristics
TLF80511EJ
General Product Characteristics
4.1
Absolute Maximum Ratings
Table 1 Absolute Maximum Ratings ¹⁾
T_j = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Parameter
Symbol
Values
Unit Note / Test Condition Number
Min. Typ. Max.
Input I
Voltage
Output Q
V_I
-0.3 –
45 V –
Voltage
Temperature
V_Q
-0.3 –
7
V–
Junction Temperature
T_j
-40 –
150 °C –
Storage Temperature
T_stg
-55 –
150 °C –
ESD Susceptibility
ESD Susceptibility
V_ESD
-4
–
ESD Susceptibility
V_ESD
-1.5 –
1) Not subject to production test, specified by design.
4
kV HBM²⁾
1.5 kV CDM³⁾
2) ESD susceptibility, HBM according to ANSI/ESDA/JEDEC JS001 (1.5k Ω, 100 pF)
3) ESD susceptibility, Charged Device Model “CDM” according JEDEC JESD22-C101
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
6
Rev. 1.0, 2014-11-17