TLE6251-2G_11 Datasheet, PDF (6/36 Pages) Infineon Technologies AG – High Speed CAN-Transceiver with Wake and Failure Detection

TLE6251-2G
Pin Configuration
Table 1 Pin Definitions and Functions
Pin Symbol
Function
7
INH
Inhibit Output;
Open drain output to control external circuitry;
High impedance in Sleep mode
8
NERR
9
WK
Error Flag Output;
Failure and Wake-Up indication output, active “Low”
Output voltage level depends on the V_IO supply
Wake-Up Input;
Local Wake-Up input;
Wake-Up input sensitive to a level change in both directions, “High” to “Low” and
vice versa.
10
V_S
Battery Voltage Supply;
100 nF decoupling capacitor to GND recommend.
11
SPLIT
Split Termination Output;
Stabilization output to support the “Recessive” voltage level of the CAN bus lines.
12
CANL
CAN Bus Low Level I/O;
“Low” in “Dominant” state
13
CANH
CAN Bus High Level I/O;
“High” in “Dominant” state
14
NSTB
Stand-By Control input;
Integrated pull-down resistor;
“High” for Normal Operation mode.
Data Sheet
6
Rev. 1.1, 2011-06-06