English
Language : 

TLE6251-2G_11 Datasheet, PDF (23/36 Pages) Infineon Technologies AG – High Speed CAN-Transceiver with Wake and Failure Detection
TLE6251-2G
Diagnosis-Flags at NERR and RxD
8
Diagnosis-Flags at NERR and RxD
Table 3 Truth Table
NSTB EN INH
1
1 HIGH
1
0 HIGH
Mode
NORMAL
RECEIVE
ONLY
Event
NERR
No CAN bus failure1)
1
CAN bus failure1)
0
Wake-up via CAN bus/no wake- 1
up request detected
Wake-up via pin WK2)
0
No VS fail detected3)
1
VS fail detected3)
0
No TxD time-out,
1
Over - Temperature event,
RxD recessive clamping or
bus dominant time out
detected4)
RxD
LOW: bus
dominant,
HIGH: bus
recessive
LOW: bus
dominant,
HIGH: bus
recessive
SPLIT
ON
ON
TxD time-out,
0
Over - Temperature event,
RxD recessive clamping or
bus dominant time out
detected4)
0
0 HIGH
STAND BY Wake-up request detected5)
0
0
No Wake up request detected5) 1
1
0
0 Floating SLEEP
Wake-up request detected5)
0
0
No wake-up request detected5) 1
1
OFF
OFF
1) Only valid after at least four recessive to dominant edges at TxD when entering the Normal Operation Mode.
2) Only valid before four recessive to dominant edges at TxD when entering the Normal Operation Mode.
3) Power - On flag only available, if VCC and VIO are active. Power - On flag will be cleared when entering Normal Operation
Mode.
4) Valid after a transition from Normal Operation Mode.
5) Only valid if VCC and VIO are active.
Data Sheet
23
Rev. 1.1, 2011-06-06