|
TLE6251-2G_11 Datasheet, PDF (3/36 Pages) Infineon Technologies AG – High Speed CAN-Transceiver with Wake and Failure Detection | |||
|
◁ |
High Speed CAN-Transceiver with Wake and Failure
Detection
TLE6251-2G
1
Overview
Features
⢠HS CAN Transceiver with data transmission rates up to 1 MBaud
⢠Compliant to ISO 11898-5
⢠Very low power consumption in Sleep Mode
⢠Bus Wake-Up and local Wake-Up
⢠Inhibit output to control external circuitry
⢠Split termination to stabilize the âRecessiveâ level
⢠Separate VIO input to adapt different micro controller supply voltages
⢠Separate output for failure diagnosis
⢠Optimized for low electromagnetic emission (EME)
⢠Optimized for a high immunity against electromagnetic interference (EMI)
⢠Very high ESD robustness, ± 9 kV according to IEC 61000-4-2
⢠Protected against automotive transients
⢠Receive-Only mode for node failure analysis
⢠TxD time-out function and RxD recessive clamping with failure indication
⢠TxD to RxD short circuit recognition with failure indication
⢠CANH and CANL short circuit recognition with failure indication
⢠Bus dominant clamping diagnosis
⢠Under-voltage detection at VCC, VIO and VS
⢠Power-Up and Wake-Up source recognition
⢠Short circuit proof and Over-Temperature protection
⢠Green Product (RoHS compliant)
⢠AEC Qualified
PG-DSO-14
Description
As a successor of the TLE6251G, the TLE6251-2G is designed to provide an excellent passive behavior in Power Down.
This feature makes the TLE6251-2G extremely suitable for mixed power supply HS-CAN networks. The TLE6251-2G
provides different operation modes with a very low quiescent current in Sleep mode. Based on the high symmetry of the
CANH and CANL signals, the TLE6251-2G provides a very low level of electromagnetic emission (EME) within a broad
frequency range. The TLE6251-2G is integrated in a RoHS compliant PG-DSO-14 package and fulfills or exceeds the
requirements of the ISO11898-5. The TLE6251G and the TLE6251-2G are fully pin compatible and function compatible.
Based on the Infineon Smart Power Technology SPT®, the TLE6251-2G provides industry leading ESD
robustness together with a very high electromagnetic immunity (EMI). The Infineon Smart Power Technology
SPT® allows bipolar and CMOS control circuitry in accordance with DMOS power devices to exist on the same
monolithic circuit. The TLE6251-2G and the Infineon SPT® technology are AEC qualified and tailored to withstand
the harsh conditions of the automotive environment.
Type
TLE6251-2G
Data Sheet
Package
PG-DSO-14
3
Marking
TLE6251-2G
Rev. 1.1, 2011-06-06
|
▷ |