TLE42764_11 Datasheet, PDF (6/20 Pages) Infineon Technologies AG – Low Dropout Linear Voltage Regulator

TLE42764
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Table 1 Absolute Maximum Ratings¹⁾
T_j = -40 °C to 150 °C; all voltages with respect to ground, (unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values
Unit Test Condition
Min.
Max.
Input I, Enable EN
4.1.1 Voltage
Voltage Adjust Input VA
V_I
-42
45
V
–
4.1.2 Voltage
Output Q
V_VA
-0.3
10
V
–
4.1.3 Voltage
Temperature
V_Q
-1
40
V
–
4.1.4 Junction temperature
4.1.5 Storage temperature
ESD Susceptibility
T_j
-40
150
°C –
T_stg
-50
150
°C –
4.1.6 ESD Absorption
V_ESD,HBM
-3
3
kV Human Body Model
(HBM)²⁾
4.1.7
V_ESD,CDM -1000
1000
V
Charge Device
Model (CDM)³⁾ at all
pins
1) not subject to production test, specified by design
2) ESD susceptibility Human Body Model “HBM” according to AEC-Q100-002 - JESD22-A114
3) ESD susceptibility Charged Device Model “CDM” according to ESDA STM5.3.1
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
6
Rev. 1.2, 2011-02-15