TLE5011 Datasheet, PDF (29/43 Pages) Infineon Technologies AG – GMR Angle Sensor

TLE5011
Specification
FSYNC_INV
Addr: 06_H
7
FILT_INV
WU
Field
FILT_INV
FSYNC
6
Bits
7
6-0
5
Type
WU
WU
Reset Value: 00_H
4
3
2
1
0
FSYNC
WU
Description
Filter Input Inversion (to check the digital data path during operation)
0: Filter Inputs are not inverted
1: Filter Inputs are inverted
Frame Synchronization (7-bit unsigned integer value)
The Filter Update time of approx. 80 µs results from the filter
decimation. The phase of this decimation can be set and checked by
this counter.
If FIR_BYP is activated, this counter overflows at the value 31_D.
ANGT
Addr: 07_H
7
6
5
reserved
-
ANGT_EN
W
Reset Value: 00_H
4
3
ANGT_Y
W
2
1
0
ANGT_X
W
Field
reserved
ANGT_EN
ANGT_Y
ANGT_X
Bits
Type
Description
7
-
Reserved, must be set to 0
6
W
Angle Test Enable
0: Angle Test disable command
1: Angle Test enable command
in this case X and Y values represent resistive test values that can be
used to simulate angle values
5-3
W
2-0
W
Angle Test X and Y value
See : Table 16 “Functional Angle Test” on Page 36
Reserved Registers (08_H to 0B_H)
The values in these registers are 8-bit unsigned integer values.
The values in addr.8 and addr.9 have to be in reset status.
Reserved
Addr: 08_H
Reset Value: FF_H
7
6
5
4
3
2
1
0
Reserved
Final Data Sheet
29
V1.1, 2010-05