TLD1311EL_15 Datasheet, PDF (28/33 Pages) Infineon Technologies AG – 3 Channel High Side Current Source

TLD1311EL
Power Stage
Note: Due to the reverse battery protection a reverse protection diode for the light module may be obsolete. In case
of high ISO-pulse requirements and only minor protecting components like capacitors a reverse protection
diode may be reasonable. The external protection circuit needs to be verified in the application.
10.2
Electrical Characteristics Power Stage
Electrical Characteristics Power Stage
Unless otherwise specified: V_S = 5.5 V to 18 V, T_j = -40 °C to +150 °C, V_OUTx = 3.6 V, all voltages with respect to
ground, positive current flowing into pin for input pins (I), positive currents flowing out of the I/O and output pins
(O) (unless otherwise specified)
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min. Typ. Max.
10.2.1 Output leakage current
I_OUTx(leak)
µA
V_EN = 5.5 V
I_{IN_SET} = 0 µA
V_OUTx = 2.5 V
–
–
7
–
–
3
T_j = 150 °C
1) _{Tj = 85 °C}
10.2.2 Output leakage current in -
–
–
50
µA
1) _{VEN = 5.5 V}
boost over battery setup
I_{OUTx(leak,B2B)}
I_{IN_SET} = 0 µA
V_OUTx = V_S = 40 V
10.2.3 Reverse output current
-I_OUTx(rev)
–
–
1
µA
1) _{VS = -16 V}
Output load: LED with
break down voltage
< - 0.6 V
10.2.4 Output current accuracy k_LT
limited temperature range
10.2.5 Output current accuracy k_ALL
over temperature
697 750 803
645 750 855
10.2.6
Voltage drop over power V_PS(CC)
stage during current control
V_PS(CC) = V_S - V_OUTx
697 750 803
645 750 855
0.75 –
–
V
10.2.7 Required output voltage for V_OUTx(CC) 2.3
–
–
V
current control
1)_{Tj = 25...115 °C}
V_S = 8...18 V
V_PS = 2 V
R_SET = 6...12 kΩ
R_SET = 30 kΩ
1)_{Tj = -40...115 °C}
V_S = 8...18 V
V_PS = 2 V
R_SET = 6...12 kΩ
R_SET = 30 kΩ
1) _{VS = 13.5 V}
R_SET = 12 kΩ
I_OUTx ≥ 90% of
(k_LT(typ)/R_SET)
1) _{VS = 13.5 V}
R_SET = 12 kΩ
I_OUTx ≥ 90% of
(k_LT(typ)/R_SET)
10.2.8 Maximum output current I_OUT(max)
120 –
–
mA R_SET = 4.7 kΩ
The maximum output
current is limited by the
thermal conditions.
Please refer to
Pos. 4.3.1 - Pos. 4.3.3
Data Sheet
28
Rev. 1.1, 2015-03-19