English
Language : 

TLE7233EM Datasheet, PDF (22/33 Pages) Infineon Technologies AG – SPI Driver for Enhanced Relay Control
◁
SPI Driver for Enhanced Relay Control
SPIDER - TLE7233EM
Diagnostic Features
8.2
Electrical Characteristics Diagnostic
VDD = 3.0 V to VDDA, VDDA = 4.5 V to 5.5 V, TJ = -40 °C to +150 °C
All voltages with respect to ground, positive current flowing into pin (unless otherwise specified)
typical values: VDD = 5.0 V, VDDA = 5.0 V, TJ = 25 °C
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min. Typ. Max.
OFF State Diagnosis
8.2.1 Open load detection threshold
VDS(OL)
1.0
–
voltage
2.5
V
–
8.2.2 Output pull-down diagnosis current ID(PD)
30
–
per channel
100
µA
VDS = 13.5 V
8.2.3 Open load diagnosis delay time td(OL)
30
–
ON State Diagnosis
200 µs –
8.2.4 Over load detection current
ID(OVL)
0.5
–
8.2.5 Over load detection delay time
tOFF(OVL) 5
–
0.95 A
–
60
µs –
Data Sheet
22
Rev. 1.2, 2014-05-09
 ▷